# rebattery.org: full text of cited rules As of 2026-10-27. CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Attribute "rebattery.org". ## State rules (reviewed jurisdictions) ### Arizona (https://rebattery.org/states/arizona/) Arizona's battery statute that we confirmed covers lead-acid batteries: sellers must take back used ones, charge a refundable deposit, and post a notice saying landfill disposal is unlawful. We found no Arizona stewardship law for small batteries. - A lead-acid battery seller must accept used lead-acid batteries of the type and quantity sold, at the point of transfer, without charging to take them. [A.R.S. § 44-1323 Sale of lead acid batteries; refundable deposit; notice, A] - Sellers charge a refundable deposit on each new lead-acid battery, refunded if a used battery and receipt are returned within 45 days. [A.R.S. § 44-1323 Sale of lead acid batteries; refundable deposit; notice, B] - The notice sellers must post states that it is unlawful to dispose of a motor vehicle battery or other lead-acid battery in a landfill or any unauthorized site. [A.R.S. § 44-1323 Sale of lead acid batteries; refundable deposit; notice, A] - Lead-acid batteries sold after July 1, 1991 must bear a universally accepted recycling symbol, and advertising must mention the deposit. [A.R.S. § 44-1323 Sale of lead acid batteries; refundable deposit; notice, C-D] ### California (https://rebattery.org/states/california/) California already bans every battery from household trash, recycling and organics bins. Its Responsible Battery Recycling Act sets up producer-funded collection, but CalRecycle had not finished the regulations as of October 27, 2026, so the producer deadlines have not started. Business rules come from California's own hazardous waste program, which we could not read. - CalRecycle lists all batteries as household hazardous waste that is banned from the trash, recycling and organics bins. [Waste Banned from the Trash] - The Responsible Battery Recycling Act (AB 2440) requires producers of covered batteries to form or join a stewardship organization; the plan is due 12 months after CalRecycle's regulations take effect. [Battery Stewardship (Responsible Battery Recycling Act)] - Covered batteries are loose or easily removable batteries; the act excludes primary batteries over 2 kg, rechargeable batteries over 5 kg or 300 Wh, lead-acid, motor vehicle and medical-device batteries. [Battery Stewardship (Responsible Battery Recycling Act)] - CalRecycle must act on a plan within 24 months of the regulations, and the program must be fully implemented 12 months after approval. [Battery Stewardship (Responsible Battery Recycling Act)] ### Colorado (https://rebattery.org/states/colorado/) Colorado enacted battery stewardship in SB25-163, signed June 4, 2025. Nothing applies to residents yet: producers join a stewardship organization from August 2027, retailer restrictions follow in 2029, and a statewide ban on landfilling covered batteries starts January 1, 2030. - A battery stewardship organization must submit its plan to CDPHE by July 1, 2027. [SB25-163 Battery Stewardship Programs (signed June 4, 2025)] - Producers must participate in a stewardship organization from August 1, 2027. [SB25-163 Battery Stewardship Programs (signed June 4, 2025)] - Battery labeling requirements begin January 1, 2028. [SB25-163 Battery Stewardship Programs (signed June 4, 2025)] - Retailers may sell covered batteries only from participating producers from July 1, 2029. [SB25-163 Battery Stewardship Programs (signed June 4, 2025)] - From January 1, 2030, covered batteries must go to collection and may not be disposed of in a landfill. [SB25-163 Battery Stewardship Programs (signed June 4, 2025)] ### District of Columbia (https://rebattery.org/states/district-of-columbia/) The District's battery producer responsibility law (D.C. Law 23-211) is in effect. DOEE approved The Battery Network's (formerly Call2Recycle) stewardship plan on August 4, 2023, and since August 1, 2023 nobody may dispose of covered batteries except through a recycling program. - From August 1, 2023, no person may dispose of a covered battery other than through a battery recycling program. [D.C. Code § 8-771.09 Disposal ban] - Producers have been barred from disposing of covered batteries since January 1, 2022. [D.C. Code § 8-771.09 Disposal ban] - Covered primary batteries weigh up to 4.4 pounds; covered rechargeable batteries weigh under 11 pounds and are rated at no more than 300 watt-hours. [D.C. Code § 8-771.01 Definitions (battery producer responsibility)] - Producers must participate in a stewardship plan submitted to DOEE; plans were due January 1, 2023. [D.C. Code § 8-771.02 Battery stewardship requirements] - DOEE approved the plan of The Battery Network (formerly Call2Recycle) on August 4, 2023. [Battery Stewardship: Producers] ### Florida (https://rebattery.org/states/florida/) Florida's battery statute (§ 403.7192) targets nickel-cadmium and small sealed lead-acid rechargeables and mercuric-oxide cells: consumers and very small business generators may not put them in mixed solid waste, facilities must segregate them, and makers must run return programs. Lead-acid batteries carry a $1.50 retail fee. - No person may knowingly place a rechargeable nickel-cadmium or small sealed lead-acid battery, or a product containing one, used by a consumer or by a facility that is a very small quantity generator, in a mixed solid waste stream. [Fla. Stat. § 403.7192 Batteries; requirements for consumer, (1)(d), (3)(b)] - No person may knowingly place a mercuric-oxide dry cell, or a product containing one, in a mixed solid waste stream. [Fla. Stat. § 403.7192 Batteries; requirements for consumer, (3)(a)] - Government, industrial, commercial, communications and medical facilities must collect and segregate these batteries and send them to a manufacturer- or marketer-designated collection site or a permitted facility. [Fla. Stat. § 403.7192 Batteries; requirements for consumer, (3)(c)] - Manufacturers and marketers must run a unit management program with designated return sites and tell buyers about the disposal ban; those that do not may not sell these batteries in Florida. [Fla. Stat. § 403.7192 Batteries; requirements for consumer, (6), (8)] - Products powered by these rechargeables must have an easily removable battery and be labeled with a recycling symbol and "Cd" or "Pb". [Fla. Stat. § 403.7192 Batteries; requirements for consumer, (4)] - No person may sell consumer button mercuric-oxide cells, or alkaline-manganese or zinc-carbon batteries with intentionally introduced mercury (button alkalines are limited to 25 mg). [Fla. Stat. § 403.7192 Batteries; requirements for consumer, (2)] - A $1.50 fee applies to each new or remanufactured lead-acid battery sold at retail. [Fla. Stat. § 403.7185 Lead-acid battery fees] ### Illinois (https://rebattery.org/states/illinois/) Illinois passed the Portable and Medium-Format Battery Stewardship Act (P.A. 103-1033, effective August 9, 2024). Producers have had to join a stewardship organization since January 1, 2026, and retailers since July 1, 2026. From January 1, 2028 covered batteries are banned from landfills, incinerators and recycling carts. A separate law has required lead-acid take-back since 1990. - Producers selling covered batteries or battery-containing products in or into Illinois must participate in, and fund, an approved battery stewardship organization; non-participants may not sell them. [415 ILCS 205/15 Requirement that producers implement a stewardship plan, (a)-(b)] - Retailers may not sell a covered battery or battery-containing product unless its producer is listed as a participant in an approved stewardship organization. [415 ILCS 205/20 Role of retailers, (a)] - Stewardship organizations must collect all covered batteries, of every chemistry and brand, free of charge, from any person, business, government agency or nonprofit. [415 ILCS 205/40 Collection and management requirements, (a)] - No person may knowingly put a covered battery in a sanitary landfill, mix it with landfill-bound waste or recyclables bound for a materials recovery facility, or burn it. [415 ILCS 205/70 General battery disposal and collection requirements, (b)(3)-(7)] - Covered batteries that are hazardous waste may be managed under federal or state hazardous waste law instead of through the stewardship program. [415 ILCS 205/70 General battery disposal and collection requirements, (a)(2)] - No penalty may be assessed on an individual for improper disposal of covered batteries in a residential or noncommercial setting; violations by others carry a $7,000 civil penalty each. [415 ILCS 205/60 Penalties and civil actions, (a), (f)] - Covered batteries must carry producer identification from January 1, 2027 (unless very small) and chemistry plus a do-not-trash indication from January 1, 2029. [415 ILCS 205/65 Marking requirements for batteries, (a)] - Lead-acid battery retailers must accept used lead-acid batteries for recycling, one for each new battery bought, and post an 8.5 by 11 inch notice saying "DO NOT put motor vehicle batteries in the trash." [415 ILCS 5/22.23 Batteries, (a)] - Since September 1, 1990 no person may put a lead-acid battery in a container bound for a municipal landfill or dispose of it in a landfill or incinerator; since January 1, 2020 it may not be mixed with recyclables collected by a hauler. [415 ILCS 5/22.23 Batteries, (f), (f-5)] - A business accepting used lead-acid batteries for recycling may not let them accumulate for more than 90 days, and retailers may deliver them only to a wholesaler, manufacturer, recycling facility or permitted secondary lead smelter. [415 ILCS 5/22.23 Batteries, (c), (e)] ### Maine (https://rebattery.org/states/maine/) Maine enacted battery stewardship in 2025 (38 M.R.S. § 1617). Its deadlines run from DEP rules and the first plan approval, neither of which had happened as of October 27, 2026. An older law already bars certain facilities from trashing mercuric-oxide, nickel-cadmium and sealed lead-acid batteries. - Producers of portable and medium-format covered batteries must join a stewardship organization; the plan is due six months after DEP adopts rules. [38 M.R.S. § 1617 Battery stewardship program (PL 2025, c. 608)] - Sales of covered batteries from non-participating producers are banned starting 180 days after the first plan is approved. [38 M.R.S. § 1617 Battery stewardship program (PL 2025, c. 608)] - Marking requirements begin two years after plan approval. [38 M.R.S. § 1617 Battery stewardship program (PL 2025, c. 608)] - Batteries embedded in products are brought in from January 1, 2030; lead-acid batteries over 11 pounds are excluded. [38 M.R.S. § 1617 Battery stewardship program (PL 2025, c. 608)] - Employees of government, industrial, communications and medical facilities may not dispose of mercuric-oxide or rechargeable nickel-cadmium and sealed lead-acid batteries except through a collection system. [38 M.R.S. § 2165 Regulation of certain dry cell batteries] ### Minnesota (https://rebattery.org/states/minnesota/) Minnesota has no enacted portable-battery stewardship law. Older statutes still matter: rechargeable batteries have been barred from mixed municipal solid waste since 1991, with manufacturers paying for collection; some facilities may not trash certain dry cells; and lead-acid retailers must take returns. - Since August 1, 1991, rechargeable batteries, battery packs and products with non-removable rechargeable batteries may not be placed in mixed municipal solid waste. [Minn. Stat. § 115A.9157 Rechargeable batteries and products] - Manufacturers of rechargeable batteries and products are responsible for the costs of collecting and managing them so they are not put in mixed municipal solid waste. [Minn. Stat. § 115A.9157 Rechargeable batteries and products] - Government, industrial, communications and medical facilities may not put mercuric-oxide, silver-oxide, nickel-cadmium or sealed lead-acid dry cells in mixed municipal solid waste. [Minn. Stat. § 115A.9155 Disposing of certain dry cell batteries] - Lead-acid battery retailers must accept used batteries from customers and charge at least $10 on a new battery sold without a trade-in; wholesalers must accept returns from retailers. [Minn. Stat. § 325E.115 Lead acid batteries; collection for recycling] ### New York (https://rebattery.org/states/new-york/) New York's Rechargeable Battery Law bans knowingly throwing away rechargeable batteries and makes retailers take them back, up to ten per visit. Manufacturers must run a collection plan. A 2025 amendment adds a sale restriction for manufacturers from January 1, 2027. - No person may knowingly dispose of rechargeable batteries as solid waste. [N.Y. Environmental Conservation Law § 27-1805 Rechargeable battery disposal ban] - Retailers that sell rechargeable batteries must accept used rechargeable batteries from the public, up to ten per visit. [N.Y. Environmental Conservation Law § 27-1807 Retailer requirements] - Retailers must post an 8.5 by 11 inch notice telling customers that rechargeable batteries are accepted for recycling. [N.Y. Environmental Conservation Law § 27-1807 Retailer requirements] - Manufacturers must have a collection plan; under the 2025 amendment, manufacturers of the newly covered batteries may not sell them from January 1, 2027 without one. [N.Y. Environmental Conservation Law § 27-1807 Retailer requirements] ### North Carolina (https://rebattery.org/states/north-carolina/) North Carolina bans lithium-ion batteries from landfills and incinerators starting December 1, 2026. Lead-acid batteries have been banned from both for decades. North Carolina has no battery stewardship law that we found. - No person may knowingly dispose of lithium-ion batteries in landfills, effective December 1, 2026. [N.C. Gen. Stat. § 130A-309.10 Prohibited acts; disposal of certain solid wastes in landfills or by incineration prohibited, (f)(16)] - No person may knowingly dispose of lithium-ion batteries by incineration in a permitted incinerator, effective December 1, 2026. [N.C. Gen. Stat. § 130A-309.10 Prohibited acts; disposal of certain solid wastes in landfills or by incineration prohibited, (f1)(9)] - The incineration ban does not apply to an incinerator solely owned and operated by the generator of the waste. [N.C. Gen. Stat. § 130A-309.10 Prohibited acts; disposal of certain solid wastes in landfills or by incineration prohibited, (f2)] - Lead-acid batteries may not be disposed of in landfills or by incineration. [N.C. Gen. Stat. § 130A-309.10 Prohibited acts; disposal of certain solid wastes in landfills or by incineration prohibited, (f)(8), (f1)(5); N.C. Gen. Stat. § 130A-309.70 Landfilling and incineration of lead-acid batteries prohibited] - Anyone may deliver a used lead-acid battery to a battery retailer or wholesaler, a secondary lead smelter, or an authorized collection or recycling facility; knowingly landfilling or burning one carries a civil penalty of up to $50 per battery. [N.C. Gen. Stat. § 130A-309.70 Landfilling and incineration of lead-acid batteries prohibited] ### Vermont (https://rebattery.org/states/vermont/) Vermont was the first state with a primary-battery stewardship law (2014) and widened it to rechargeables and heavier primaries in 2023 No. 152. Collection is free, and batteries of every common chemistry are banned from Vermont landfills and solid waste. Lead-acid batteries have been banned from landfills since 1990. - No person may knowingly dispose of nickel-cadmium, small sealed lead-acid, nonconsumer mercuric-oxide, rechargeable or primary batteries in solid waste or in landfills. [10 V.S.A. § 6621a Landfill disposal requirements, (a)(6)] - Lead-acid batteries may not be knowingly disposed of in solid waste or landfills (since July 1, 1990). [10 V.S.A. § 6621a Landfill disposal requirements, (a)(1)] - Each battery stewardship plan must collect covered batteries from covered entities at no cost, regardless of brand or producer. [10 V.S.A. chapter 168, § 7584] - Primary batteries are non-rechargeable batteries of 4.4 pounds or less, extended to 25 pounds from January 1, 2026; rechargeable batteries are those up to 25 pounds or 2,000 watt-hours. Batteries not easily removable from a product are excluded. [10 V.S.A. chapter 168, § 7581] - Producers may sell covered batteries in Vermont only if they participate in an approved stewardship plan; new producers must notify the Agency before selling. [10 V.S.A. chapter 168, § 7582] - Retailers may sell covered batteries and battery-containing products only from producers listed as participating in an approved plan on the Agency website. [10 V.S.A. chapter 168, § 7587] - Plans must provide DOT-compliant packaging, forms and instructions for damaged or defective lithium batteries and lithium-ion batteries over 300 Wh, and at least two collection facilities for them in each county. [10 V.S.A. chapter 168, § 7584] ### Washington (https://rebattery.org/states/washington/) Washington's battery stewardship law (chapter 70A.555 RCW) makes producers fund collection of portable batteries, then medium-format batteries. Once it applies, nobody may put covered batteries in the trash, and drop-off is free. Vehicle lead-acid batteries have a separate, older retailer take-back law with a $5 core charge. - Producers selling covered batteries or battery-containing products in or into Washington must participate in, and fund, an approved battery stewardship organization; a producer that does not may not sell them in the state. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.020] - Retailers may not sell a covered battery or battery-containing product unless the producer certifies it participates in an approved stewardship organization, from July 1, 2027 for portable batteries and July 1, 2029 for medium-format batteries. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.030(1)] - No person may place covered batteries in waste containers for disposal at incinerators, waste-to-energy facilities or landfills, and covered batteries may not go in a mixed-recycling container unless it has a separate battery compartment. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.140(3)-(4)] - Unwanted covered batteries must go to a stewardship collection site or a local government collection facility, and no fee may be charged when they are dropped off. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.140(1)-(2)] - A business that is a regulated generator under federal or state hazardous or solid waste law may instead manage its covered batteries under those laws. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.140(1)(b)] - From January 1, 2028, easily removable covered batteries must be marked with the producer's identity (unless very small); from January 1, 2030, also with the chemistry and a do-not-dispose-as-household-waste indication. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.130(1)] - Portable rechargeable batteries are those up to 11 pounds and 300 watt-hours; portable primary batteries weigh up to 4.4 pounds. Medium-format batteries go up to 25 pounds (and, for rechargeables, 2,000 watt-hours). Lead-acid batteries over 11 pounds and batteries not easily removable from a product are excluded. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.010] - Vehicle batteries may be disposed of only by delivery to a seller of lead-acid batteries, an entity authorized by Ecology, or a secondary lead smelter; each improperly disposed battery can bring a fine of up to $1,000. [RCW 70A.205.505 Battery disposal — restrictions] - Retailers of vehicle batteries must accept used vehicle batteries from customers at the point of transfer, in a quantity at least equal to what they buy, and must post a sign about the take-back. [RCW 70A.205.515 Requirements for accepting used batteries by retailers of vehicle batteries] - Retailers must charge a core charge of at least $5 on each vehicle battery sold unless the buyer returns a used one. [RCW 70A.205.520 Retail core charge] ### Wisconsin (https://rebattery.org/states/wisconsin/) Wisconsin enacted battery stewardship (Wis. Stat. § 287.175). Producers need a stewardship organization from January 1, 2027, chemistry marking follows in 2029, and from January 1, 2028 covered batteries may not be landfilled or burned. Lead-acid batteries have long been banned from disposal facilities. - From January 1, 2027, no producer may sell covered batteries or battery-containing products in or into Wisconsin unless it has designated a battery stewardship organization. [Wis. Stat. § 287.175 Battery stewardship] - Each stewardship organization must submit a plan to the Department of Natural Resources by January 1, 2027. [Wis. Stat. § 287.175 Battery stewardship] - Covered batteries must carry producer identification from January 1, 2027, and chemistry marking from January 1, 2029. [Wis. Stat. § 287.175 Battery stewardship] - From January 1, 2028, no person may dispose of or burn a covered battery in a solid waste disposal facility; it may go only to a stewardship collection site or event. [Wis. Stat. § 287.07 Prohibitions on land disposal and incineration, (6)] - No person may dispose of a lead-acid battery in a solid waste disposal facility or burn it in a solid waste treatment facility. [Wis. Stat. § 287.07 Prohibitions on land disposal and incineration, (1m)] ## Stewardship laws ### Washington battery stewardship law (chapter 70A.555 RCW) RCW 70A.555 (2023 c 434, SB 5144). Enacted; producer duties begin January 1, 2027. https://app.leg.wa.gov/RCW/default.aspx?cite=70A.555&full=true - 2026-07-01: Portable battery plans due (or six months after rules, whichever is later) - 2027-01-01: Producers must participate in an approved stewardship organization - 2027-07-01: Retailer sales restriction and disposal ban for portable batteries (earlier if a plan starts first) - 2028-01-01: Producer identification marking - 2029-07-01: Retailer restriction and disposal ban extend to medium-format batteries - 2030-01-01: Chemistry and do-not-trash marking ### Illinois Portable and Medium-Format Battery Stewardship Act 415 ILCS 205 (P.A. 103-1033). In effect; producer participation required since January 1, 2026. https://ilga.gov/legislation/ilcs/documents/041502050K10.htm - 2026-01-01: Producers must participate in an approved stewardship organization - 2026-07-01: Retailers may sell only participating producers' batteries - 2027-01-01: Producer identification marking - 2028-01-01: Disposal ban: no landfill, incinerator or mixed recycling; free drop-off - 2029-01-01: Chemistry and do-not-trash marking ### Vermont primary and rechargeable battery stewardship (10 V.S.A. chapter 168) 10 V.S.A. §§ 7581–7595. In effect; rechargeables and primaries up to 25 lb covered from January 1, 2026. https://legislature.vermont.gov/statutes/fullchapter/10/168 - 2026-01-01: Rechargeable batteries and primaries up to 25 lb come under the program ### District of Columbia battery producer responsibility (D.C. Code § 8-771.01 et seq.) D.C. Code §§ 8-771.01–8-771.09 (D.C. Law 23-211). In effect; plan approved August 4, 2023. https://code.dccouncil.gov/us/dc/council/code/sections/8-771.01 - 2022-01-01: Producers barred from disposing of covered batteries - 2023-01-01: Stewardship plans due - 2023-08-01: Disposal ban for everyone except through a recycling program ### Colorado Battery Stewardship Programs (SB25-163) SB25-163. Enacted; first deadline July 1, 2027. https://leg.colorado.gov/bills/sb25-163 - 2027-07-01: Stewardship plan due to CDPHE - 2027-08-01: Producers must participate - 2028-01-01: Labeling requirements begin - 2028-03-01: CDPHE assessment due - 2029-07-01: Retailer sales restriction - 2030-01-01: Covered batteries must go to collection; landfill disposal banned ### Maine battery stewardship program (38 M.R.S. § 1617) 38 M.R.S. § 1617 (PL 2025, c. 608). Enacted; deadlines wait on DEP rules and first plan approval. https://www.legislature.maine.gov/statutes/38/title38sec1617.html - tbd: Plan due six months after DEP rules - tbd: Sales ban on non-participating producers 180 days after first plan approval - tbd: Marking two years after plan approval - 2030-01-01: Embedded batteries covered ### Wisconsin battery stewardship (Wis. Stat. § 287.175) Wis. Stat. § 287.175; § 287.07(6). Enacted; producer duties begin January 1, 2027. https://docs.legis.wisconsin.gov/statutes/statutes/287/ii/175 - 2027-01-01: Producers must designate a stewardship organization; plans due; producer marking - 2028-01-01: Covered batteries banned from disposal facilities and burning - 2029-01-01: Chemistry marking ### California Responsible Battery Recycling Act (AB 2440) Public Resources Code § 42420 et seq. (AB 2440). Enacted; CalRecycle regulations still pending as of October 27, 2026. https://calrecycle.ca.gov/epr/batteries/ - 2026-06-16: CalRecycle informal regulations workshop - tbd: Plan due 12 months after regulations take effect - tbd: Full implementation 12 months after plan approval ### New York Rechargeable Battery Law (ECL Article 27, Title 18) N.Y. ECL §§ 27-1805, 27-1807. In effect; 2025 amendment adds a sale restriction from January 1, 2027. https://www.nysenate.gov/legislation/laws/ENV/27-1807 - 2027-01-01: Manufacturer sale restriction for newly covered batteries ### Minnesota rechargeable battery manufacturer responsibility (Minn. Stat. § 115A.9157) Minn. Stat. § 115A.9157. In effect since August 1, 1991. https://www.revisor.mn.gov/statutes/cite/115A.9157 - 1991-08-01: Rechargeable batteries banned from mixed municipal solid waste ### Florida battery requirements for consumers, manufacturers and sellers (Fla. Stat. § 403.7192) Fla. Stat. § 403.7192. In effect. http://www.leg.state.fl.us/statutes/index.cfm?App_mode=Display_Statute&URL=0400-0499/0403/Sections/0403.7192.html ## Battery types ### Lithium-ion (https://rebattery.org/batteries/lithium-ion/) EPA says most discarded lithium-ion batteries are likely ignitable and reactive hazardous waste, so businesses usually manage them as universal waste under 40 CFR Part 273. For transport they are Class 9: UN3480 shipped alone, UN3481 in or with equipment, with a ground-only recycling exception in 49 CFR 173.185(d). - EPA states most lithium-ion batteries would likely be ignitable (D001) and reactive (D003) hazardous waste when discarded. [Lithium-Ion Battery Recycling (page updated September 18, 2026)] - Any battery that is hazardous waste may be managed under the federal universal waste rule in 40 CFR Part 273 instead of the full hazardous waste rules. [40 CFR 273.2(b)(3); 40 CFR 261.9] - Batteries discarded by households are excluded from federal hazardous waste rules; state law may still ban them from the trash. [40 CFR 261.4(b)(1)] - EPA plans, but had not proposed as of October 27, 2026, a separate universal waste category for lithium batteries. [Improving Recycling and Management of Renewable Energy Wastes: Universal Waste Regulations for Solar Panels and Lithium Batteries; Federal Register search: EPA documents matching "universal waste" lithium] - UN3480 (batteries alone) is forbidden on passenger aircraft and limited to 35 kg per package on cargo aircraft. [49 CFR 172.101] - Beginning May 10, 2024, each lithium-ion battery must be marked with its watt-hour rating on the outside case. [49 CFR 173.185(a)(5)] - Batteries going to recycling or disposal by motor vehicle may use the relaxed packaging in 173.185(d) and need not meet the UN 38.3 test requirement. [49 CFR 173.185(d)] - Damaged, defective or recalled batteries that could create a dangerous evolution of heat, fire or short circuit may travel only by highway, rail or vessel, packed under 173.185(f). [49 CFR 173.185(f)] ### Lithium metal (https://rebattery.org/batteries/lithium-metal/) Lithium metal batteries are non-rechargeable lithium cells. Businesses that discard them must decide whether they are hazardous waste and, if so, may use the universal waste rule. They ship as UN3090 alone or UN3091 in or with equipment; UN3090 is forbidden on passenger aircraft. - Any battery that is hazardous waste may be managed under the federal universal waste rule in 40 CFR Part 273 instead of the full hazardous waste rules. [40 CFR 273.2(b)(3); 40 CFR 261.9] - Batteries discarded by households are excluded from federal hazardous waste rules; state law may still ban them from the trash. [40 CFR 261.4(b)(1)] - EPA's lithium battery recycling memo addresses regulatory status for lithium batteries generally. [Lithium Battery Recycling Regulatory Status and Frequently Asked Questions (memo)] - UN3090 is Class 9, forbidden on passenger aircraft and limited to 35 kg per package on cargo aircraft. [49 CFR 172.101] - Lithium metal batteries going to recycling by motor vehicle may use 173.185(d). [49 CFR 173.185(d)] - Small lithium metal cells (up to 1 g lithium) and batteries (up to 2 g) may qualify for the 173.185(c) exceptions. [49 CFR 173.185(c)(1)(ii)] ### Nickel-metal hydride (https://rebattery.org/batteries/nickel-metal-hydride/) Nickel-metal hydride batteries are rechargeable but are not "regulated batteries" under the federal Battery Act, which covers only nickel-cadmium and small sealed lead. For U.S. ground and air transport they ship as dry batteries under special provision 130; the HMT lists UN3496 for vessel transport only. - Any battery that is hazardous waste may be managed under the federal universal waste rule in 40 CFR Part 273 instead of the full hazardous waste rules. [40 CFR 273.2(b)(3); 40 CFR 261.9] - Batteries discarded by households are excluded from federal hazardous waste rules; state law may still ban them from the trash. [40 CFR 261.4(b)(1)] - The Battery Act's labeling and easy-removal rules apply to "regulated batteries": rechargeables with a cadmium or lead electrode, or other chemistries EPA designates. Nickel-metal hydride is not listed. [Mercury-Containing and Rechargeable Battery Management Act, §14302(7), §14322] - UN3496 "Batteries, nickel-metal hydride" carries the HMT symbol W, meaning it applies only to transport by vessel. [49 CFR 172.101] - Dry batteries such as nickel-metal hydride must be packed to prevent short circuits and heat under special provision 130. [49 CFR 172.102 130(b)] - Used dry batteries up to 9 volts consolidated for recycling by highway or rail are excepted from the HMR. [49 CFR 172.102 130(d)] ### Nickel-cadmium (https://rebattery.org/batteries/nickel-cadmium/) Nickel-cadmium batteries are "regulated batteries" under the federal Battery Act: they must carry the Ni-Cd recycling label and be easily removable, and their collection is governed nationwide by the universal waste rule. Many states also ban them from the trash. Sealed Ni-Cd ships as a dry battery; vented wet Ni-Cd is UN2795. - The Battery Act requires the chemical name or "Ni-Cd" and the phrase "BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY." [Mercury-Containing and Rechargeable Battery Management Act, §14322(b)(2)(A)] - Collection, storage and transport of used rechargeable batteries is regulated under EPA's universal waste rule, notwithstanding state law. [Mercury-Containing and Rechargeable Battery Management Act, §14323(a)] - Any battery that is hazardous waste may be managed under the federal universal waste rule in 40 CFR Part 273 instead of the full hazardous waste rules. [40 CFR 273.2(b)(3); 40 CFR 261.9] - Batteries discarded by households are excluded from federal hazardous waste rules; state law may still ban them from the trash. [40 CFR 261.4(b)(1)] - Wet nickel-cadmium batteries filled with alkali are UN2795, Class 8, packed under 173.159. [49 CFR 172.101; 49 CFR 173.159] - Sealed nickel-cadmium cells not otherwise listed ship as dry batteries under special provision 130. [49 CFR 172.102 130] ### Small sealed lead-acid (https://rebattery.org/batteries/small-sealed-lead-acid/) Small sealed lead-acid batteries are "regulated batteries" under the federal Battery Act and must carry "Pb" or lead-recycling wording. Businesses may manage them as universal waste or under the lead-acid reclamation rule. Non-spillable ones ship as UN2800 and are excepted under 49 CFR 173.159a when they pass the tests. - The Battery Act requires "Pb" or the words "LEAD", "RETURN" and "RECYCLE", and for sealed batteries "BATTERY MUST BE RECYCLED." [Mercury-Containing and Rechargeable Battery Management Act, §14322(b)(2)(B)] - Spent lead-acid batteries may be managed under 40 CFR 266 subpart G or as universal waste under Part 273. [40 CFR 266.80(a); 40 CFR 273.2(a)(2)] - Batteries discarded by households are excluded from federal hazardous waste rules; state law may still ban them from the trash. [40 CFR 261.4(b)(1)] - Non-spillable batteries are UN2800, Class 8, packed under 173.159 and excepted under 173.159a when conditions are met. [49 CFR 172.101; 49 CFR 173.159a] - Excepted non-spillable batteries must be protected against short circuits and marked "NON-SPILLABLE" or "NON-SPILLABLE BATTERY". [49 CFR 173.159a(c)(1)-(2)] ### Lead-acid (https://rebattery.org/batteries/lead-acid/) Spent lead-acid batteries sent for reclamation can be managed under 40 CFR 266.80, which exempts generators, collectors and transporters from most hazardous waste rules, or as universal waste. Most states require retailers to take them back. Flooded batteries ship as UN2794 under 49 CFR 173.159, with a highway and rail exception. - Generators, collectors and transporters of lead-acid batteries going to reclamation are exempt from most of parts 262–270 but remain subject to part 261 and 262.11. [40 CFR 266.80(a)] - Spent lead-acid batteries not managed under part 266 subpart G are subject to Part 273. [40 CFR 273.2(a)(2)] - The Battery Act's collection provision excludes lead-acid batteries managed under part 266 subpart G. [Mercury-Containing and Rechargeable Battery Management Act, §14323(a)(2)] - Flooded lead-acid batteries are UN2794, "Batteries, wet, filled with acid, electric storage," Class 8. [49 CFR 172.101] - By highway or rail they are excepted from most rules when no other hazardous materials are aboard and they are braced and protected against short circuits. [49 CFR 173.159(e)] ### Alkaline (https://rebattery.org/batteries/alkaline/) Federal law has banned intentionally added mercury in alkaline and zinc-carbon batteries since 1996, and household batteries are outside federal hazardous waste rules. Whether alkalines may go in the trash depends on the state: Vermont and the District of Columbia ban it, and several stewardship laws add bans from 2027 onward. - Alkaline-manganese batteries manufactured on or after May 13, 1996 may not contain intentionally introduced mercury, except up to 25 mg in button cells. [Mercury-Containing and Rechargeable Battery Management Act, §14332] - Zinc-carbon batteries manufactured on or after May 13, 1996 may not contain intentionally introduced mercury. [Mercury-Containing and Rechargeable Battery Management Act, §14333] - Batteries discarded by households are excluded from federal hazardous waste rules; state law may still ban them from the trash. [40 CFR 261.4(b)(1)] - A business must still determine whether its waste batteries exhibit a hazardous characteristic; only hazardous batteries fall under Part 273. [40 CFR 273.2(b)(3)] - Alkaline batteries ship as "Batteries, dry, sealed, n.o.s." under special provision 130, packed to prevent short circuits. [49 CFR 172.102 130] - Used dry batteries up to 9 volts moving by highway or rail for recycling are excepted from the HMR. [49 CFR 172.102 130(d)] ### Button and coin cells (https://rebattery.org/batteries/button-cell/) Button and coin cells span several chemistries: lithium coin cells ship as lithium metal (UN3090 or UN3091), while alkaline, silver-oxide and zinc-air buttons ship as dry batteries. Federal law caps mercury in alkaline buttons at 25 mg. Some states ban silver-oxide and mercuric-oxide buttons from facility trash. - Alkaline-manganese button cells may contain no more than 25 mg of mercury. [Mercury-Containing and Rechargeable Battery Management Act, §14332] - Any battery that is hazardous waste may be managed under the federal universal waste rule in 40 CFR Part 273 instead of the full hazardous waste rules. [40 CFR 273.2(b)(3); 40 CFR 261.9] - Batteries discarded by households are excluded from federal hazardous waste rules; state law may still ban them from the trash. [40 CFR 261.4(b)(1)] - Lithium coin cells are lithium metal cells; small ones may qualify for the 173.185(c) exceptions. [49 CFR 173.185(c)] - Non-lithium button cells ship as dry batteries under special provision 130. [49 CFR 172.102 130] ### Mercuric oxide (https://rebattery.org/batteries/mercuric-oxide/) The federal Battery Act restricts the sale of mercuric-oxide batteries, and Florida separately bans sale of consumer mercuric-oxide button cells. Businesses discarding them may need to manage them as hazardous or universal waste by businesses, and several states, including Florida, Minnesota, Vermont and Maine, bar them from the trash. - Sections 14334 and 14335 of the Battery Act restrict sale of button-cell and other mercuric-oxide batteries. [Mercury-Containing and Rechargeable Battery Management Act, §§14334–14335] - Any battery that is hazardous waste may be managed under the federal universal waste rule in 40 CFR Part 273 instead of the full hazardous waste rules. [40 CFR 273.2(b)(3); 40 CFR 261.9] - Batteries discarded by households are excluded from federal hazardous waste rules; state law may still ban them from the trash. [40 CFR 261.4(b)(1)] - Mercuric-oxide batteries not covered by another entry ship as dry batteries under special provision 130. [49 CFR 172.102 130] ## Federal ### Which batteries Part 273 covers (https://rebattery.org/federal/universal-waste/which-batteries-are-covered/) Under 40 CFR 273.2, a battery is managed as universal waste only if it is a waste and exhibits a hazardous waste characteristic. A used battery becomes a waste the day it is discarded, for example sent for reclamation; an unused one when the handler decides to discard it. Spent lead-acid batteries may use 40 CFR 266 subpart G instead. - Part 273 applies to persons managing batteries as defined in 273.9, except those listed in 273.2(b). [40 CFR 273.2(a)(1)] - Spent lead-acid batteries not managed under 40 CFR part 266 subpart G are subject to Part 273. [40 CFR 273.2(a)(2)] - Spent lead-acid batteries managed under part 266 subpart G. [40 CFR 273.2(b)(1)] - Batteries that are not yet wastes under part 261. [40 CFR 273.2(b)(2)] - Batteries that are not hazardous waste; a battery is hazardous if it exhibits one or more characteristics in part 261 subpart C. [40 CFR 273.2(b)(3)] - A used battery becomes a waste on the date it is discarded, for example when sent for reclamation. [40 CFR 273.2(c)(1)] - An unused battery becomes a waste on the date the handler decides to discard it. [40 CFR 273.2(c)(2)] - A battery is a device of one or more electrically connected electrochemical cells designed to receive, store and deliver electric energy; it includes an intact, unbroken battery from which electrolyte has been removed. [40 CFR 273.9] ### Household and VSQG batteries (https://rebattery.org/federal/universal-waste/households-and-vsqgs/) Household waste is excluded from federal hazardous waste rules by 40 CFR 261.4(b)(1), and very small quantity generators are conditionally exempt under 262.14. Under 40 CFR 273.8, either may choose to manage batteries under the universal waste rule, and anyone who mixes them with regulated universal waste must manage the mix under Part 273. - Household waste, including household waste that has been collected, transported, stored, treated or disposed, is not hazardous waste; "household waste" covers material from single and multiple residences, hotels and motels, campgrounds and similar places. [40 CFR 261.4(b)(1)] - This is the federal rule only. Several states ban battery disposal by everyone; check the state pages. [40 CFR 261.4(b)(1)] - A VSQG generates no more than 100 kg of non-acute hazardous waste in a calendar month (with lower limits for acute waste). [40 CFR 260.10] - A VSQG that meets the conditions in 262.14 is exempt from most of parts 262 through 268 and 270. [40 CFR 262.14(a)] - Household wastes exempt under 261.4(b)(1) and VSQG wastes exempt under 262.14 that are the same type as a universal waste may, at the person's option, be managed under Part 273. [40 CFR 273.8(a)] - Anyone who commingles those wastes with regulated universal waste must manage the commingled waste under Part 273. [40 CFR 273.8(b)] ### Part 273 definitions that matter for batteries (https://rebattery.org/federal/universal-waste/definitions/) Part 273 turns on a handful of definitions in 40 CFR 273.9. A handler either generates universal waste or accumulates waste received from other handlers. Handler size is set by what is on site at any time, 5,000 kg of all universal waste combined, not by monthly generation as in the hazardous waste rules. - A handler is a generator of universal waste, or the owner or operator of a facility that receives universal waste from other handlers, accumulates it, and sends it on to another handler, a destination facility or a foreign destination. [40 CFR 273.9] - A handler is not a person who treats, disposes of or recycles universal waste (beyond the activities 273.13 and 273.33 allow), nor a person transporting it off-site. [40 CFR 273.9] - A large quantity handler accumulates 5,000 kg or more total of universal waste (batteries, pesticides, mercury-containing equipment, lamps, aerosol cans, calculated collectively) at any time. [40 CFR 273.9] - The large quantity designation lasts through the end of the calendar year in which the 5,000 kg limit is met or exceeded. [40 CFR 273.9] - A small quantity handler never accumulates 5,000 kg or more at any time. [40 CFR 273.9] - A destination facility treats, disposes of or recycles a category of universal waste; a site that only accumulates it is not a destination facility. [40 CFR 273.9] - A universal waste transfer facility is a transportation-related facility where shipments are held for ten days or less in the normal course of transport. [40 CFR 273.9] - A universal waste transporter is anyone transporting universal waste off-site by air, rail, highway or water. [40 CFR 273.9] ### Prohibitions: no disposal, dilution or treatment (https://rebattery.org/federal/universal-waste/prohibitions/) Small and large quantity handlers and universal waste transporters are prohibited from disposing of universal waste and from diluting or treating it, under 40 CFR 273.11, 273.31 and 273.51. The exceptions are responding to releases and, for handlers, the battery activities listed in 273.13(a) and 273.33(a). - A small quantity handler is prohibited from disposing of universal waste and from diluting or treating it, except when responding to releases under 273.17 or managing specific wastes under 273.13. [40 CFR 273.11] - Large quantity handlers are under the same prohibitions, with exceptions for 273.37 and 273.33. [40 CFR 273.31] - A transporter may not dispose of, dilute or treat universal waste except when responding to releases under 273.54. [40 CFR 273.51] - With every cell casing intact and closed, a handler may sort batteries by type, mix types in one container, discharge them, regenerate them, disassemble packs into cells, remove batteries from products, and remove electrolyte (closing the cell again immediately). [40 CFR 273.13(a)(2); 40 CFR 273.33(a)(2)] ### Notification and EPA identification numbers (https://rebattery.org/federal/universal-waste/notification/) A small quantity handler of universal waste does not notify EPA (40 CFR 273.12). A large quantity handler must send written notification to the Regional Administrator and receive an EPA identification number before meeting or exceeding 5,000 kg on site, unless it already has one (273.32). - A small quantity handler is not required to notify EPA of universal waste handling activities. [40 CFR 273.12] - Must send written notification to the Regional Administrator and receive an EPA Identification Number before meeting or exceeding the 5,000 kg storage limit. [40 CFR 273.32(a)(1)] - A handler that already notified EPA of hazardous waste activities and has an EPA ID need not renotify. [40 CFR 273.32(a)(2)] - The notice includes the handler's name and mailing address, a site contact and phone number, the location of the activity, the types of universal waste managed, and a statement that more than 5,000 kg is accumulated at one time. [40 CFR 273.32(b)(1)-(5)] ### Managing universal waste batteries on site (https://rebattery.org/federal/universal-waste/battery-management/) Handlers must manage universal waste batteries to prevent releases (40 CFR 273.13(a) and 273.33(a)). Any battery showing leakage, spillage or damage that could cause leakage goes in a closed, structurally sound, compatible container. Sorting, mixing, discharging and disassembly are allowed while every cell casing stays intact. - A battery that shows evidence of leakage, spillage or damage that could cause leakage under reasonably foreseeable conditions must be contained in a container that is closed, structurally sound, compatible with the battery contents and itself free of leaks or damage. [40 CFR 273.13(a)(1); 40 CFR 273.33(a)(1)] - Sorting by type; mixing types in one container; discharging to remove electric charge; regenerating; disassembling packs into batteries or cells; removing batteries from consumer products; removing electrolyte. Each requires the cell casing to stay intact and closed, except that cells may be opened to remove electrolyte and must be closed immediately afterward. [40 CFR 273.13(a)(2); 40 CFR 273.33(a)(2)] - A handler that removes electrolyte or generates other solid waste (pack materials, discarded products) must determine whether it exhibits a hazardous waste characteristic. [40 CFR 273.13(a)(3)] - If it does, the handler is its generator and it is fully regulated under parts 260–272; if not, it may be managed under applicable solid waste rules. [40 CFR 273.13(a)(3)(i)-(ii)] ### Labeling universal waste batteries (https://rebattery.org/federal/universal-waste/labeling/) Each universal waste battery, or the container holding it, must be clearly labeled or marked with one of three phrases: "Universal Waste—Battery(ies)", "Waste Battery(ies)" or "Used Battery(ies)". The rule is the same for small (40 CFR 273.14(a)) and large (273.34(a)) quantity handlers; large handlers may also label a tank. - Any one of: "Universal Waste—Battery(ies)", "Waste Battery(ies)" or "Used Battery(ies)". [40 CFR 273.14(a)] - The label goes on each battery or on the container in which the batteries are contained; for large quantity handlers, also a tank. [40 CFR 273.14(a); 40 CFR 273.34(a)] - Labeling is separate from the duty to show how long waste has accumulated. One accepted method is marking the container with the earliest date any battery in it became a waste or was received. [40 CFR 273.15(c)(1)] - When universal waste offered for transport is a hazardous material, the handler must package, label, mark and placard it and prepare shipping papers under 49 CFR parts 172–180. [40 CFR 273.18(c)] - Because universal waste is not manifested, it may not be described with the DOT name "hazardous waste, n.o.s." nor have "waste" added to the proper shipping name. [40 CFR 273.52(b)] ### How long you can keep universal waste batteries (https://rebattery.org/federal/universal-waste/accumulation-time-limits/) Handlers may accumulate universal waste batteries for no longer than one year from the date they became a waste or were received (40 CFR 273.15 and 273.35). Longer storage is allowed only to gather enough for proper recovery, treatment or disposal, and the handler bears the burden of proving that. - No longer than one year from the date the universal waste is generated or received from another handler. [40 CFR 273.15(a); 40 CFR 273.35(a)] - Longer only if solely to accumulate quantities needed for proper recovery, treatment or disposal; the handler must prove it. [40 CFR 273.15(b); 40 CFR 273.35(b)] - Mark the container with the earliest date any waste in it became a waste or was received. [40 CFR 273.15(c)(1)] - Mark each item (each battery) with its date. [40 CFR 273.15(c)(2)] - Keep an on-site inventory of each item's date, or of the earliest date for a group of items or containers. [40 CFR 273.15(c)(3)-(4)] - Place the waste in a specific accumulation area and identify the earliest date in that area. [40 CFR 273.15(c)(5)] - Any other method that clearly demonstrates the length of accumulation. [40 CFR 273.15(c)(6)] ### Employee training for battery handlers (https://rebattery.org/federal/universal-waste/employee-training/) A small quantity handler must inform all employees who handle or manage universal waste about proper handling and emergency procedures for the types handled (40 CFR 273.16). A large quantity handler must ensure those employees are thoroughly familiar with handling and emergency procedures for their normal and emergency duties (273.36). - Inform all employees who handle or have responsibility for managing universal waste; the information must describe proper handling and emergency procedures appropriate to the waste types at the facility. [40 CFR 273.16] - Ensure all employees are thoroughly familiar with proper waste handling and emergency procedures relative to their responsibilities during normal operations and emergencies. [40 CFR 273.36] - A hazmat employee under DOT rules includes anyone who prepares hazardous materials for transportation, loads or handles them, or marks or tests packaging. DOT training duties are separate from Part 273 training. [49 CFR 171.8] - People preparing small lithium batteries in equipment for air under 173.185(c)(4) must receive instruction on those conditions. [49 CFR 173.185(c)(4)(iv)] ### Responding to a battery release (https://rebattery.org/federal/universal-waste/releases/) Handlers and transporters must immediately contain all releases of universal waste and its residues (40 CFR 273.17, 273.37, 273.54). They must then decide whether the released material is hazardous waste; if it is, they are its generator and must manage it under the full hazardous waste rules in part 262. - Immediately contain all releases of universal wastes and other residues from universal wastes. [40 CFR 273.17(a); 40 CFR 273.37(a); 40 CFR 273.54(a)] - Determine whether any material resulting from the release is hazardous waste; if so, manage it under parts 260–272 as its generator, subject to part 262. [40 CFR 273.17(b); 40 CFR 273.37(b); 40 CFR 273.54(b)] - A damaged lithium battery that could produce dangerous heat, fire or short circuit ships only by highway, rail or vessel under the 49 CFR 173.185(f) packaging rules. [49 CFR 173.185(f)] ### Off-site shipments of universal waste batteries (https://rebattery.org/federal/universal-waste/off-site-shipments/) Handlers may send universal waste batteries only to another universal waste handler, a destination facility or a foreign destination (40 CFR 273.18 and 273.38). They must confirm the receiver agrees before shipping, follow DOT rules if the batteries are hazardous materials, and become transporters themselves when they self-haul. - Only another universal waste handler, a destination facility or a foreign destination. [40 CFR 273.18(a); 40 CFR 273.38(a)] - Before shipping to another handler, the originating handler must ensure the receiving handler agrees to receive the shipment. [40 CFR 273.18(d); 40 CFR 273.38(d)] - A handler that self-transports universal waste becomes a universal waste transporter for that trip and must follow subpart D. [40 CFR 273.18(b); 40 CFR 273.38(b)] - If the waste is a hazardous material under 49 CFR parts 171–180, the handler packages, labels, marks, placards and prepares shipping papers under parts 172–180. [40 CFR 273.18(c); 40 CFR 273.38(c)] - If a shipment is rejected, the originating handler must take it back or agree with the receiver on a destination facility. [40 CFR 273.18(e)] - A handler that receives hazardous waste that is not universal waste must immediately notify the EPA regional office with the shipper's name, address and phone number. [40 CFR 273.18(g)] ### Shipment records for universal waste batteries (https://rebattery.org/federal/universal-waste/tracking-shipments/) A small quantity handler need not keep records of universal waste shipments (40 CFR 273.19). A large quantity handler must log every shipment received and sent, with the other party, quantity and date, and keep each record three years (273.39). Destination facilities keep receipt records for three years (273.62). - Not required to keep records of shipments of universal waste. [40 CFR 273.19] - Record each shipment received: originating handler or foreign shipper name and address, quantity of each type, date received. [40 CFR 273.39(a)] - Record each shipment sent: receiving handler, destination facility or foreign destination name and address, quantity of each type, date it left. [40 CFR 273.39(b)] - The record can be a log, invoice, manifest, bill of lading or other shipping document; keep it at least three years. [40 CFR 273.39(a), (c)] - Record each shipment received with sender, quantity of each type and date; keep at least three years. [40 CFR 273.62(a)-(b)] ### Universal waste transporters (https://rebattery.org/federal/universal-waste/transporters/) Universal waste transporters follow DOT hazardous materials rules for any load that is a hazardous material (40 CFR 273.52), may hold universal waste at a transfer facility for ten days or less (273.53), and may deliver only to a universal waste handler, destination facility or foreign destination (273.55). - Comply with 49 CFR parts 171–180 for universal waste meeting the hazardous material definition in 171.8. [40 CFR 273.52(a)] - Universal waste does not need a hazardous waste manifest, so DOT does not treat it as hazardous waste; it may not be described as "hazardous waste, n.o.s." or have "waste" added to its proper shipping name. [40 CFR 273.52(a)-(b)] - Storage at a universal waste transfer facility is limited to ten days or less. [40 CFR 273.53(a)] - A transporter storing more than ten days becomes a handler and must follow subpart B or C. [40 CFR 273.53(b)] - Only to a universal waste handler, a destination facility or a foreign destination. [40 CFR 273.55(a)] - Hazardous material shipments must be described on a shipping paper under 49 CFR part 172. [40 CFR 273.55(b)] ### Destination facilities (https://rebattery.org/federal/universal-waste/destination-facilities/) A destination facility, one that treats, disposes of or recycles universal waste, is subject to the full RCRA facility standards and permitting in parts 264, 265, 266, 268, 270 and 124 and to RCRA section 3010 notification (40 CFR 273.60). A facility that only stores universal waste is a handler, not a destination facility. - Subject to parts 264, 265, 266, 268, 270 and 124 and the notification requirement under RCRA section 3010. [40 CFR 273.60(a)] - A facility that recycles universal waste without storing it first must comply with 261.6(c)(2). [40 CFR 273.60(b)] - May send universal waste only to a handler, another destination facility or a foreign destination. [40 CFR 273.61(a)] - May reject a shipment; it then returns the load to the shipper or, by agreement, sends it to another destination facility. [40 CFR 273.61(b)] - Keeps a record of each shipment received for at least three years. [40 CFR 273.62] ### Exports and imports (https://rebattery.org/federal/universal-waste/exports-and-imports/) Handlers and transporters who send universal waste batteries to a foreign destination are subject to 40 CFR part 262 subpart H (273.20, 273.40, 273.56). Imported universal waste falls under subpart H and, once in the United States, the Part 273 subpart for whoever is managing it (273.70). - A small quantity handler sending universal waste to a foreign destination is subject to part 262 subpart H. [40 CFR 273.20] - The same applies to large quantity handlers and to transporters. [40 CFR 273.40; 40 CFR 273.56] - Transporters follow subpart D, handlers subpart B or C, and destination facilities subpart E, immediately after the waste enters the United States. [40 CFR 273.70(a)-(c)] - Spent lead-acid batteries exported for reclamation under part 266 subpart G are subject to 262.11, 262.18 and part 262 subpart H. [40 CFR 266.80(a) table row 6] ### Hazardous waste generator categories (https://rebattery.org/federal/hazardous-waste/generator-categories/) Federal generator categories are set by monthly hazardous waste generation in 40 CFR 260.10: up to 100 kg is a very small quantity generator, more than 100 kg and less than 1,000 kg a small quantity generator, and 1,000 kg or more a large quantity generator. Universal waste handlers are classed instead by what is on site, 5,000 kg. - Very small quantity generator: 100 kg (220 lb) or less. [40 CFR 260.10] - Small quantity generator: more than 100 kg but less than 1,000 kg (2,200 lb). [40 CFR 260.10] - Large quantity generator: 1,000 kg (2,200 lb) or more. [40 CFR 260.10] - Wastes listed in 261.9, including batteries managed under 273.2, are exempt from parts 262–270 except as Part 273 specifies. [40 CFR 261.9] - Universal waste handler size depends on 5,000 kg accumulated at any time, all universal waste types combined. [40 CFR 273.9] - A VSQG that accumulates 1,000 kg or more of non-acute hazardous waste at any time loses part of its exemption for that waste (time limits and other conditions apply). [40 CFR 262.14(a)(4)] ### Lithium batteries as hazardous waste (https://rebattery.org/federal/hazardous-waste/lithium-batteries/) EPA states that most lithium-ion batteries on the market are likely hazardous waste when disposed of, because they may catch fire or explode, and would likely carry waste codes D001 (ignitable) and D003 (reactive). Businesses can manage them under the universal waste rule in 40 CFR Part 273; household batteries are exempt federally. - Most lithium-ion batteries, when discarded, would likely be considered ignitable and reactive hazardous wastes, carrying codes D001 and D003. [Lithium-Ion Battery Recycling (page updated September 18, 2026)] - A solid waste exhibiting the characteristic of ignitability has the EPA Hazardous Waste Number D001. [40 CFR 261.21(b)] - EPA has published a memo on lithium battery recycling regulatory status and frequently asked questions. [Lithium Battery Recycling Regulatory Status and Frequently Asked Questions (memo)] - A battery that exhibits a hazardous waste characteristic can be managed as universal waste under Part 273. [40 CFR 273.2(b)(3)] - Household batteries are not hazardous waste under the federal household exclusion. [40 CFR 261.4(b)(1)] - EPA says it is working on a proposal for universal waste standards tailored to lithium batteries, separate from the existing battery category. [Improving Recycling and Management of Renewable Energy Wastes: Universal Waste Regulations for Solar Panels and Lithium Batteries] - As of October 27, 2026, a search of the Federal Register for EPA documents on "universal waste" and lithium returned no proposed rule; the Part 273 battery rules above remain the ones in force. [Federal Register search: EPA documents matching "universal waste" lithium] ### Spent lead-acid batteries going to reclamation (https://rebattery.org/federal/hazardous-waste/spent-lead-acid-batteries/) Spent lead-acid batteries that will be reclaimed can be managed under 40 CFR 266.80, which exempts generators, collectors and transporters from most of parts 262–270 while keeping them subject to part 261 and 262.11. Alternatively, they may be managed as universal waste under Part 273. Storage before reclamation by the reclaimer brings facility standards. - Generators, collectors, transporters, storers and regenerators of lead-acid batteries for reclamation may be exempt from certain hazardous waste requirements, or may choose the universal waste rule in Part 273. [40 CFR 266.80(a)] - Spent lead-acid batteries not managed under part 266 subpart G are subject to Part 273. [40 CFR 273.2(a)(2)] - Batteries reclaimed through regeneration: exempt from parts 262 (except 262.11), 263–266, 268, 270, 124 and RCRA 3010 notification; still subject to part 261 and 262.11. [40 CFR 266.80(a) table row 1] - Generating, collecting or transporting batteries reclaimed other than by regeneration: same exemptions, but subject to applicable part 268 provisions. [40 CFR 266.80(a) table row 2] - A reclaimer that stores batteries before reclaiming them must meet 266.80(b), which applies parts 264/265 facility standards (except waste analysis and manifest provisions). [40 CFR 266.80(b)] - Flooded lead-acid batteries are UN2794, Class 8; by highway or rail, 49 CFR 173.159(e) excepts them from most rules when its conditions are met. [49 CFR 172.101; 49 CFR 173.159(e)] ### Rechargeable battery labeling under 42 U.S.C. 14322 (https://rebattery.org/federal/battery-act/rechargeable-battery-labeling/) The Mercury-Containing and Rechargeable Battery Management Act requires regulated batteries, nickel-cadmium and small sealed lead-acid, to carry a recycling symbol and specific wording, and to be easily removable from consumer products or sold separately (42 U.S.C. 14322). States may not enforce different labeling or removability rules for them. - A regulated battery or rechargeable consumer product manufactured from one year after May 13, 1996 may not be sold unless the labeling rules are met and the battery is easily removable from the product or sold separately. [Mercury-Containing and Rechargeable Battery Management Act, §14322(a)] - Three chasing arrows or a comparable recycling symbol. [Mercury-Containing and Rechargeable Battery Management Act, §14322(b)(1)] - Ni-Cd batteries: the chemical name or "Ni-Cd" and "BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY." [Mercury-Containing and Rechargeable Battery Management Act, §14322(b)(2)(A)] - Lead-acid batteries: "Pb" or the words "LEAD", "RETURN" and "RECYCLE", and if sealed, "BATTERY MUST BE RECYCLED." [Mercury-Containing and Rechargeable Battery Management Act, §14322(b)(2)(B)] - Products with a non-removable regulated battery, and packaging, carry "CONTAINS NICKEL-CADMIUM BATTERY…" or "CONTAINS SEALED LEAD BATTERY…" wording. [Mercury-Containing and Rechargeable Battery Management Act, §14322(b)(3)-(4)] - No federal agency, state or locality may enforce an easy-removability or environmental labeling requirement for a rechargeable battery or product that is not identical to the federal one. [Mercury-Containing and Rechargeable Battery Management Act, §14322(e)] ### Collection, storage and transport under 42 U.S.C. 14323 (https://rebattery.org/federal/battery-act/collection-programs/) Section 14323 of the Battery Act says the collection, storage and transportation of used rechargeable batteries, and of consumer products with non-removable rechargeable batteries, are regulated under EPA's universal waste rule as published May 11, 1995, notwithstanding state law. Lead-acid batteries managed under 40 CFR 266 subpart G are excluded. - Collection, storage or transportation of used rechargeable batteries and products with non-removable rechargeable batteries is regulated under EPA's regulations at 60 Fed. Reg. 25492 (May 11, 1995), notwithstanding any state or local law. [Mercury-Containing and Rechargeable Battery Management Act, §14323(a)] - Lead-acid batteries managed under 40 CFR 266 subpart G (or an equivalent state program) are excluded. [Mercury-Containing and Rechargeable Battery Management Act, §14323(a)(2)] - Violations may be enforced under the Solid Waste Disposal Act; states may enforce if EPA finds they adopted identical requirements and provide for enforcement. [Mercury-Containing and Rechargeable Battery Management Act, §14323(b)] ### Mercury in batteries: the federal phase-out (https://rebattery.org/federal/battery-act/mercury-batteries/) Subchapter III of the Battery Act phases out mercury in batteries. Alkaline-manganese batteries made from May 13, 1996 may not contain intentionally introduced mercury, except up to 25 mg in a button cell, and the same intentional-mercury ban applies to zinc-carbon batteries (42 U.S.C. 14332–14333). Mercuric-oxide batteries are restricted separately. - No alkaline-manganese battery manufactured on or after May 13, 1996 with intentionally introduced mercury may be sold; button cells may contain up to 25 mg. [Mercury-Containing and Rechargeable Battery Management Act, §14332] - No zinc-carbon battery manufactured on or after May 13, 1996 with intentionally introduced mercury may be sold. [Mercury-Containing and Rechargeable Battery Management Act, §14333] - Sections 14334 and 14335 restrict the sale of button cell mercuric-oxide batteries and other mercuric-oxide batteries. [Mercury-Containing and Rechargeable Battery Management Act, §§14334–14335] - Florida separately prohibits sale of consumer button mercuric-oxide batteries and alkaline or zinc-carbon batteries with intentionally introduced mercury. [Fla. Stat. § 403.7192 Batteries; requirements for consumer, (2)] ## Shipping ### UN3480 Lithium ion batteries including lithium ion polymer batteries (https://rebattery.org/shipping/un/un3480/) UN3480 is the entry for lithium ion cells and batteries shipped on their own, not inside or packed with a device. It is Class 9, packed under 49 CFR 173.185, forbidden on passenger aircraft, and limited to a 30 percent state of charge by special provision A100 when that provision applies. - The Hazardous Materials Table lists UN3480 in Class 9 with label code 9, packaging section 185 in all three packaging columns, "Forbidden" for passenger aircraft or railcar and 35 kg for cargo aircraft only. [49 CFR 172.101] - Special provision A100 requires lithium ion cells and batteries to be offered at a state of charge not exceeding 30 percent of rated capacity; a higher state of charge needs Associate Administrator approval. [49 CFR 172.102 A100] - Special provision 422 says that when labelling is required the label is the lithium battery label in 172.447, and a placard, when displayed, is the one in 172.560. [49 CFR 172.102 422] - Each lithium ion battery must be marked with its watt-hour rating on the outside case, beginning May 10, 2024. [49 CFR 173.185(a)(5)] - A package qualifying as "smaller" under 173.185(c) is limited to 20 Wh per cell and 100 Wh per battery, and the lithium battery mark must show "UN3480". [49 CFR 173.185(c)(1)(i), (c)(3)(i)] ### UN3481 Lithium ion batteries contained in equipment including lithium ion polymer batteries (https://rebattery.org/shipping/un/un3481/) UN3481 covers lithium ion batteries that travel inside a device ("contained in equipment") or in the same box as the device they power ("packed with equipment"). Both rows are Class 9 under 49 CFR 173.185. Unlike UN3480, the HMT allows 5 kg per package on passenger aircraft. - The HMT has two UN3481 rows, "contained in equipment" and "packed with equipment", both Class 9 with special provisions 181, 360, 388, 422 and A54, 5 kg on passenger aircraft and 35 kg on cargo aircraft. [49 CFR 172.101] - Special provision 181 applies when one package holds batteries both packed with and contained in equipment: it must be marked and described as "UN 3481 Lithium ion batteries packed with equipment". [49 CFR 172.102 181] - Special provision 360 says a vehicle powered only by lithium batteries is described as UN3171, Battery-powered vehicle, not UN3481. [49 CFR 172.102 360] - Batteries packed with equipment go into inner packagings that completely enclose them, then into Packing Group II performance packaging, with the equipment (173.185(b)(3)(iii)). For aircraft, the count is limited to what powers the equipment plus two spare sets. [49 CFR 173.185(b)(3)(iii)] - Where batteries are contained in or packed with equipment, the lithium battery mark shows "UN3481". [49 CFR 173.185(c)(3)(i)] ### UN3090 Lithium metal batteries including lithium alloy batteries (https://rebattery.org/shipping/un/un3090/) UN3090 is the entry for lithium metal (primary, non-rechargeable) cells and batteries shipped on their own, including lithium alloy types and lithium coin cells. It is Class 9 under 49 CFR 173.185 and forbidden on passenger aircraft. Small-cell limits are expressed in grams of lithium, not watt-hours. - The HMT lists UN3090 in Class 9 with special provisions 388, 422 and A54, "Forbidden" on passenger aircraft and 35 kg on cargo aircraft only. [49 CFR 172.101] - The 173.185(c) small-cell limits for lithium metal are 1 g of lithium per cell and 2 g per battery; by highway or rail only they can rise to 5 g and 25 g with the marking "LITHIUM BATTERIES—FORBIDDEN FOR TRANSPORT ABOARD AIRCRAFT AND VESSEL". [49 CFR 173.185(c)(1)(ii), (c)(1)(iv)] - Special provision 388 assigns batteries that combine primary lithium metal cells with internally charged lithium ion cells to UN3090 or UN3091. [49 CFR 172.102 388] - The lithium battery mark shows "UN3090" for lithium metal cells or batteries shipped alone. [49 CFR 173.185(c)(3)(i)] ### UN3091 Lithium metal batteries contained in equipment including lithium alloy batteries (https://rebattery.org/shipping/un/un3091/) UN3091 is the lithium metal counterpart of UN3481: primary lithium batteries contained in a device or packed with it. Both HMT rows are Class 9 under 49 CFR 173.185. The "contained in equipment" row adds special provision A101, which caps lithium metal at 12 g per cell and 500 g per battery. - The HMT lists two UN3091 rows; "contained in equipment" carries special provisions 181, 360, 388, 422, A54 and A101, while "packed with equipment" carries 181, 360, 388, 422 and A54. [49 CFR 172.101] - Special provision A101 limits lithium metal in batteries contained in any piece of equipment to 12 g per cell and 500 g per battery. [49 CFR 172.102 A101] - Where a package holds both lithium metal and lithium ion batteries packed with equipment, special provision 181 requires both UN 3091 and UN 3481 markings and shipping descriptions; button cells installed in equipment need not be considered. [49 CFR 172.102 181] ### UN3171 Battery-powered vehicle or Battery-powered equipment (https://rebattery.org/shipping/un/un3171/) UN3171 is for vehicles and equipment shipped with their batteries installed: e-bikes, electric cars, wheelchairs, lawn tractors. Special provision 134 defines what counts as a vehicle; special provision 360 sends vehicles powered only by lithium batteries here. Lithium-powered equipment (not vehicles) uses UN3481 or UN3091 instead. - The HMT lists "Battery-powered vehicle or Battery-powered equipment" as UN3171, Class 9, packaging section 220, with special provisions 134 and 360. [49 CFR 172.101] - Special provision 134 gives examples of vehicles: electrically powered cars, motorcycles, scooters, bicycles with an electric motor, self-balancing vehicles, lawn tractors, boats, aircraft, wheelchairs and other mobility aids. [49 CFR 172.102 134] - Under special provision 134, equipment powered by lithium batteries is described as UN3091 or UN3481 ("contained in" or "packed with" equipment), not UN3171. [49 CFR 172.102 134 (b)] - Hybrid vehicles with an internal combustion or fuel cell engine are described under the engine or vehicle entries, not UN3171. [49 CFR 172.102 134 (c)] ### UN3536 Lithium batteries installed in cargo transport unit lithium ion batteries or lithium metal batteries (https://rebattery.org/shipping/un/un3536/) UN3536 covers lithium batteries installed in a cargo transport unit (for example a container) that only power things outside the unit, such as containerized energy storage. Special provision 389 sets the conditions: tested cells, racked and secured batteries, UN number display and placards on two opposing sides. - The HMT lists UN3536 in Class 9 with special provision 389 and "Forbidden" in both aircraft columns. [49 CFR 172.101] - Special provision 389: batteries must meet 173.185(a), have systems that prevent overcharge and over-discharge between batteries, and be secured to the unit's interior structure (racks, cabinets). [49 CFR 172.102 389] - The batteries inside are not subject to the package marking and labelling rules of part 172 subparts D and E; the unit itself displays the UN number per 172.332 and is placarded on two opposing sides. [49 CFR 172.102 389] ### UN2794 Batteries, wet, filled with acid, electric storage (https://rebattery.org/shipping/un/un2794/) UN2794 is the entry for flooded (spillable) lead-acid batteries such as most car, truck and forklift batteries. It is Class 8 (corrosive) under 49 CFR 173.159. By highway or rail, 173.159(e) lifts most other requirements when the batteries are braced, no other hazardous materials share the vehicle, and the other listed conditions are met. - The HMT lists UN2794 in Class 8 with label code 8, packaging section 159, 30 kg on passenger aircraft and 400 kg on cargo aircraft, and special provision A51. [49 CFR 172.101] - Wet batteries must be packaged to prevent a dangerous evolution of heat, short circuits and damage to terminals; exposed terminals can be protected with non-conductive caps or tape. [49 CFR 173.159(a)] - Batteries firmly secured to skids or pallets are authorized by rail, highway or vessel if the unit is no taller than 1.5 times the pallet width and withstands a superimposed load of twice its weight (or 1,814 kg over 907 kg). [49 CFR 173.159(d)(1)] - Highway or rail exception: no other hazardous materials in the vehicle, batteries braced against damage and short circuits, and, except when consolidating batteries for recycling, no freight from any shipper other than the battery shipper. [49 CFR 173.159(e)] ### UN2795 Batteries, wet, filled with alkali, electric storage (https://rebattery.org/shipping/un/un2795/) UN2795 covers wet storage batteries filled with an alkaline electrolyte, such as vented nickel-cadmium or nickel-iron industrial batteries. It is Class 8 under the same wet-battery packaging section as lead-acid, 49 CFR 173.159, including the highway and rail exception in paragraph (e). - The HMT lists UN2795 in Class 8, packaging section 159, with special provision A51, 30 kg on passenger aircraft and 400 kg on cargo aircraft. [49 CFR 172.101] - Section 173.159(j) excepts nickel-cadmium batteries holding no more than 10 ml of liquid potassium hydroxide solution each when heat-sealed, cushioned in foam-in-place packing and kept under 15.2 kg gross per package. [49 CFR 173.159(j)] - Damaged wet batteries that cannot retain fluid may go by highway or rail in non-bulk packaging after draining, in leakproof packaging with absorbent, or in salvage packaging. [49 CFR 173.159(k)] ### UN2800 Batteries, wet, non-spillable, electric storage (https://rebattery.org/shipping/un/un2800/) UN2800 is for non-spillable wet batteries: sealed lead-acid (VRLA, AGM and gel) types that pass the vibration and pressure-differential tests in 173.159(f). Under 173.159a they are excepted from most requirements when packed to prevent short circuits and marked "NON-SPILLABLE" or "NON-SPILLABLE BATTERY". - The HMT lists UN2800 in Class 8 with section 159a in the exceptions column and "No limit" in both aircraft columns. [49 CFR 172.101] - A battery counts as non-spillable only if it survives the vibration test and the pressure differential test in 173.159(f) without leaking. [49 CFR 173.159(f)] - To use the exception, the battery and outer packaging must be marked "NON-SPILLABLE" or "NON-SPILLABLE BATTERY", unless the battery is installed in equipment shipped unpackaged. [49 CFR 173.159a(c)(2)] - At 55 °C the battery must hold no unabsorbed free-flowing liquid and be designed so electrolyte will not flow from a cracked case. [49 CFR 173.159a(d)(1)] ### UN3028 Batteries, dry, containing potassium hydroxide solid, electric storage (https://rebattery.org/shipping/un/un3028/) UN3028 is a narrow entry: non-activated batteries that contain dry potassium hydroxide and are activated by adding water before use. Special provision 237 limits the entry to those batteries and points to the wet-battery packaging rules in 173.159(a) and (c). Ordinary alkaline AA cells are not UN3028. - The HMT lists UN3028 in Class 8 with special provision 237, 25 kg on passenger aircraft and 230 kg on cargo aircraft. [49 CFR 172.101] - Special provision 237 restricts the entry to non-activated batteries containing dry potassium hydroxide that are activated by adding water, and requires packaging under 173.159(a) and (c). [49 CFR 172.102 237] ### UN3292 Batteries, containing sodium (https://rebattery.org/shipping/un/un3292/) UN3292 is the HMT entry for batteries and cells containing sodium, the molten-sodium chemistries such as sodium-sulfur and sodium-nickel-chloride. It is Division 4.3 (dangerous when wet), not Class 9, with packaging section 189. It is a different entry from sodium-ion batteries. - The HMT lists "Batteries, containing sodium" and "Cells, containing sodium" as UN3292, Division 4.3, label 4.3, packaging section 189. [49 CFR 172.101] - For batteries the passenger aircraft column reads "Forbidden" and cargo aircraft 400 kg; for cells the columns read 25 kg and "No limit". [49 CFR 172.101] ### UN3496 Batteries, nickel-metal hydride (https://rebattery.org/shipping/un/un3496/) UN3496 applies only when nickel-metal hydride batteries travel by vessel as cargo (HMT symbol W). By highway, rail and air, NiMH batteries are "Batteries, dry, sealed, n.o.s." under special provision 130, which mainly requires protection against short circuits, heat and terminal damage, plus incident reporting. - The HMT row for nickel-metal hydride batteries carries the symbol W, Class 9, special provision 340, and refers other modes to "Batteries, dry, sealed, n.o.s." [49 CFR 172.101] - Special provision 340: by vessel, NiMH batteries must be packed to prevent heat, short circuits and terminal damage; at 100 kg gross or more in a cargo transport unit, shipping paper, manifest and stowage rules apply. [49 CFR 172.102 340] - Special provision 130 (dry batteries) requires terminal protection, packaging that prevents short circuits and heat, and written incident reports for fires or dangerous heat in all modes. [49 CFR 172.102 130] ### The recycling and disposal exception for lithium batteries Under 49 CFR 173.185(d), lithium cells and batteries sent by motor vehicle for recycling or disposal skip the UN 38.3 test records and the UN specification packaging, if they travel in a strong outer packaging that meets subpart B. They skip shipping papers, labels and placards only if they also meet the small-cell limits in (c)(1)–(3). - The exception covers a lithium cell or battery, including one contained in equipment, transported by motor vehicle to a permitted storage facility or disposal site, or for recycling. [49 CFR 173.185(d)] - It is a highway exception. Air, rail and vessel are not named in paragraph (d). [49 CFR 173.185(d)] - Paragraph (d)(1) removes the testing and record-keeping duties of paragraph (a) and the UN performance packaging of (b)(3)(ii), (b)(3)(iii) and (b)(6), when the batteries are in a strong outer packaging that conforms to subpart B of part 173. [49 CFR 173.185(d)(1)] - Paragraph (d)(2) removes subparts C through H of part 172 (shipping papers, marking, labeling, placarding, emergency response information and training) only when the cell or battery meets the size, packaging and hazard communication conditions of (c)(1)–(3). [49 CFR 173.185(d)(2)] - The general packaging rule in (b)(2) still applies: packaging must prevent short circuits, damage from shifting, and accidental activation of equipment. [49 CFR 173.185(b)(2)] - Batteries above the (c)(1) limits (more than 20 Wh per lithium ion cell or 100 Wh per battery; more than 1 g lithium per metal cell or 2 g per battery) keep the full part 172 hazard communication duties even under (d). [49 CFR 173.185(c)(1), (d)(2)] - Damaged, defective or recalled batteries are covered by paragraph (f), not (d). [49 CFR 173.185(f)] ### Shipping damaged, defective or recalled lithium batteries Lithium cells or batteries that are damaged, or that the manufacturer has identified as defective for safety reasons, may travel only by highway, rail or vessel under 49 CFR 173.185(f). Each goes in its own non-metallic inner packaging, surrounded by non-combustible, non-conductive, absorbent cushioning, inside Packing Group I packaging marked "Damaged/defective lithium ion battery". - Confirm the battery fits paragraph (f): damaged, or identified by the manufacturer as defective for safety reasons. [49 CFR 173.185(f)] - Book highway, rail or vessel transport only. [49 CFR 173.185(f)] - Enclose each cell or battery in its own non-metallic inner packaging. [49 CFR 173.185(f)(1)] - Surround each inner packaging with non-combustible, non-conductive, absorbent cushioning. [49 CFR 173.185(f)(2)] - Place it in an authorized Packing Group I outer packaging. [49 CFR 173.185(f)(3)] - Mark the outer package "Damaged/defective lithium ion battery" or "…lithium metal battery" in 12 mm letters. [49 CFR 173.185(f)(4)] - Paragraph (f) covers cells or batteries that have been damaged or identified by the manufacturer as defective for safety reasons and that could produce a dangerous evolution of heat, fire or short circuit; returns to the manufacturer for safety reasons are given as an example. [49 CFR 173.185(f)] - Transport is limited to highway, rail or vessel. [49 CFR 173.185(f)] - Each cell or battery goes in an individual, non-metallic inner packaging that completely encloses it. [49 CFR 173.185(f)(1)] - The inner packaging is surrounded by cushioning that is non-combustible, electrically non-conductive and absorbent. [49 CFR 173.185(f)(2)] - Each inner packaging is placed in a Packing Group I box (metal 4A, 4B, 4N; wooden 4C1, 4C2, 4D, 4F; solid plastic 4H2) or drum (1A2, 1B2, 1N2, 1D, 1H2); for a single battery or single item of equipment, rigid large packagings 50A, 50B, 50N, 50H or 50D are allowed. [49 CFR 173.185(f)(3)] - The outer package must be marked "Damaged/defective lithium ion battery" and/or "Damaged/defective lithium metal battery", in characters at least 12 mm (0.47 inch) high. [49 CFR 173.185(f)(4)] ### Smaller lithium cells and batteries: the 173.185(c) exception Under 49 CFR 173.185(c), lithium ion cells up to 20 Wh and batteries up to 100 Wh, and lithium metal cells up to 1 g and batteries up to 2 g of lithium, are excepted from shipping papers, labels, placards and UN specification packaging, if they pass a 1.2 m drop test packaging standard and carry the lithium battery mark. - Lithium ion: no more than 20 Wh per cell or 100 Wh per battery, with the watt-hour rating marked on each battery case. [49 CFR 173.185(c)(1)(i)] - Lithium metal: no more than 1 g lithium per cell or 2 g per battery. [49 CFR 173.185(c)(1)(ii)] - By highway or rail only, the limits rise to 60 Wh per ion cell and 300 Wh per ion battery, or 5 g per metal cell and 25 g per metal battery, with the marking "LITHIUM BATTERIES—FORBIDDEN FOR TRANSPORT ABOARD AIRCRAFT AND VESSEL." [49 CFR 173.185(c)(1)(iv)] - Cells and batteries go in inner packagings that completely enclose them, inside a strong rigid outer package; except when contained in equipment, the package must survive a 1.2 m drop in any orientation without damage or battery-to-battery contact. [49 CFR 173.185(c)(2)] - Except when packed with or contained in equipment, each package may not exceed 30 kg gross weight. [49 CFR 173.185(c)(1)(vii)] - Unless contained in or packed with equipment in quantities up to 5 kg net, the package must carry a "…FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT" marking or a CARGO AIRCRAFT ONLY label. [49 CFR 173.185(c)(1)(iii)] - Each package displays the lithium battery mark, except packages holding only button cells installed in equipment, or consignments of two packages or fewer each holding no more than four cells or two batteries installed in equipment. [49 CFR 173.185(c)(3)] - The mark is a rectangle or square with red hatched edging, at least 100 mm × 100 mm (or 100 × 70 mm on small packages), showing the UN number(s). [49 CFR 173.185(c)(3)(i)(A)-(C)] - The version of the mark in effect on May 9, 2024 may continue to be used until December 31, 2026. [49 CFR 173.185(c)(3)(ii)] ### The lithium battery mark The lithium battery mark is a rectangle with red hatched edging, at least 100 mm by 100 mm, showing the UN number of the batteries inside: UN3480, UN3481, UN3090 or UN3091. It is required on packages shipped under the 49 CFR 173.185(c) small-battery exception, with two narrow exceptions for batteries installed in equipment. - Each package prepared under 173.185(c) must display the mark, except a package containing only button cells installed in equipment, or a consignment of two packages or fewer where each holds no more than four cells or two batteries installed in equipment. [49 CFR 173.185(c)(3)] - A package with no more than 2.5 kg of lithium metal or 10 kg of lithium ion cells that skips UN specification packaging by air must show both this mark and the Class 9 lithium battery label. [49 CFR 173.185(c)(5)(i)] - Rectangle or square with hatched edging; at least 100 mm (3.9 in) wide by 100 mm high; hatching at least 5 mm (0.2 in) wide; 100 mm × 70 mm allowed when the package is too small. [49 CFR 173.185(c)(3)(i)(A)] - Symbols and letters black on white or a suitable contrasting background; hatching red. [49 CFR 173.185(c)(3)(i)(B)] - The asterisk in the mark is replaced by the UN number(s); all applicable UN numbers must appear when a package contains batteries under different numbers. [49 CFR 173.185(c)(3)(i), (c)(3)(i)(C)] - In an overpack, the mark must be visible through it or reproduced outside, and the overpack is marked "OVERPACK" in letters at least 12 mm high. [49 CFR 173.185(c)(3)(iii)] - The mark as specified on May 9, 2024 may continue to be used until December 31, 2026. [49 CFR 173.185(c)(3)(ii)] ### The Class 9 lithium battery label The LITHIUM BATTERY label in 49 CFR 172.447 is the Class 9 hazard label for lithium batteries: white, seven black vertical stripes on the top half, a battery-group symbol with one broken cell emitting flame on the lower half, and an underlined "9". Special provision 422 makes it the label to use whenever UN3480, UN3481, UN3090 or UN3091 packages need labelling. - Background white with seven black vertical stripes on the top half, spaced so the stripes and the six white spaces appear equal in width. [49 CFR 172.447(b)] - Lower half white with the battery-group symbol (one battery broken and emitting flame) and the class number "9" underlined and centered at the bottom. [49 CFR 172.447(b)] - Special provision 422 on the four lithium battery HMT entries: when labelling is required, the label is the one in 172.447; when a placard is displayed, it is the one in 172.560. [49 CFR 172.102 422] - Packages shipped under the 173.185(c) small-battery exception are excepted from part 172 labelling; some by-air packages under (c)(5) must carry both the mark and this label. [49 CFR 173.185(c), (c)(5)(i)] - The CARGO AIRCRAFT ONLY label is black on an orange background. [49 CFR 172.448(b)] - Under 173.185(c)(1)(iii) it can be used instead of the "…FORBIDDEN FOR TRANSPORT ABOARD PASSENGER AIRCRAFT" marking. [49 CFR 173.185(c)(1)(iii)] ### The 30 percent state-of-charge rule Special provision A100 in 49 CFR 172.102 requires lithium ion cells and batteries to be offered at no more than 30 percent of rated capacity. In the Hazardous Materials Table it is assigned to UN3480 (batteries shipped alone). A higher state of charge needs approval from PHMSA's Associate Administrator. - Lithium ion cells and batteries must be offered at a state of charge not exceeding 30 percent of rated capacity; above that only under conditions approved by the Associate Administrator under 49 CFR part 107, subpart H. [49 CFR 172.102 A100] - Guidance for determining rated capacity is in sub-section 38.3.2.3 of the UN Manual of Tests and Criteria. [49 CFR 172.102 A100] - In the Hazardous Materials Table, A100 appears on UN3480 and not on the UN3481 rows. [49 CFR 172.101] - Lithium ion cells or batteries for medical devices are excepted from the A100 state-of-charge limit when individually packed, in a rigid outer packaging and protected from short circuits. [49 CFR 173.185(g)(2)] - IATA's 2026 guidance says lithium ion batteries packed by themselves (PI 965) must be shipped at no more than 30 percent state of charge. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - The same guidance says that from 1 January 2026, lithium ion batteries packed with equipment must be offered for air transport at a reduced state of charge unless otherwise approved (special provision A331). [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] ### UN 38.3 testing and the test summary Every lithium cell and battery type must pass the tests in part III, sub-section 38.3 of the UN Manual of Tests and Criteria before it is shipped, under 49 CFR 173.185(a). Manufacturers keep the test record while the design ships and one year after, and manufacturers and distributors must make a test summary available. - Each lithium cell or battery must be of a type proven to meet UN 38.3, whether or not the cells used to build the battery are of a tested type. [49 CFR 173.185(a)(1)] - Types tested only to Revision 3 are no longer valid, though cells and batteries manufactured to such types before July 2003 may still be transported. [49 CFR 173.185(a)(1)(ii)] - Manufacturers must create a record of satisfactory testing before offering for transport, keep it for as long as the design is offered plus one year, and produce it to government representatives on request. [49 CFR 173.185(a)(2)] - For batteries made on or after January 1, 2008, manufacturers and later distributors must make a test summary available, except for button cells installed in equipment. [49 CFR 173.185(a)(3)] - The summary lists the manufacturer and test lab with contact details, a unique report number, report date, battery description (ion or metal, mass, Wh or lithium content, physical description, model), tests and results, the UN Manual revision used and a responsible signatory. [49 CFR 173.185(a)(3)(i)-(x)] - Batteries moved by motor vehicle for recycling or disposal under 173.185(d) are excepted from the paragraph (a) testing and record-keeping requirements. [49 CFR 173.185(d)(1)] - Low production runs (no more than 100 cells or batteries a year) and prototypes are excepted under paragraph (e) when packed in Packing Group I packaging, and their shipping papers must say "Transport in accordance with § 173.185(e)." [49 CFR 173.185(e), (e)(8)] ### Shipping prototype and low-production lithium batteries Prototype lithium cells and batteries sent for testing, and low production runs of no more than 100 per year, may ship without UN 38.3 records under 49 CFR 173.185(e), packed individually in non-conductive, non-combustible cushioning inside Packing Group I packaging. They cannot go on passenger aircraft, and cargo aircraft need prior approval. - Each cell or battery is individually packed in a non-metallic inner packaging, inside an outer packaging, surrounded by non-combustible, electrically non-conductive cushioning, or contained in equipment. [49 CFR 173.185(e)(1)] - Outer packagings must meet Packing Group I: boxes 4A, 4B, 4N, 4C1, 4C2, 4D, 4F, 4H2 or drums 1A2, 1B2, 1N2, 1D, 1H2; a cell or battery over 30 kg net is limited to one per outer packaging. [49 CFR 173.185(e)(3)] - Batteries of 12 kg or more with a strong, impact-resistant casing may go in strong outer packagings, crates or on pallets, secured against shifting and with terminals not bearing weight. [49 CFR 173.185(e)(5)] - Not permitted on passenger-carrying aircraft; cargo-only aircraft only with prior Associate Administrator approval. [49 CFR 173.185(e)(7)] - Shipping papers must include "Transport in accordance with § 173.185(e)." [49 CFR 173.185(e)(8)] ### Large lithium batteries: crates, pallets and large packagings A lithium battery weighing 12 kg (26.5 lb) or more with a strong, impact-resistant casing may ship in a strong outer packaging, a crate or on a pallet instead of UN specification packaging, under 49 CFR 173.185(b)(5). Except by air, a single large battery can also travel in a rigid large packaging under (b)(6). - Applies to cells or batteries of 12 kg (26.5 lb) or more with a strong, impact-resistant outer casing. [49 CFR 173.185(b)(5)] - They must be secured against shifting, and terminals may not support the weight of other items. [49 CFR 173.185(b)(5)] - Packages under (b)(5) may go by cargo-only aircraft only if approved by the Associate Administrator. [49 CFR 173.185(b)(5)] - Except by aircraft, a single battery or single item of equipment containing batteries may ship in rigid large packagings at Packing Group II: metal 50A, 50B, 50N (with non-conductive lining), rigid plastic 50H, wooden 50C, 50D, 50F or rigid fiberboard 50G. [49 CFR 173.185(b)(6)] - Packaging must prevent short circuits, damage from shifting and accidental activation of equipment. [49 CFR 173.185(b)(2)] - Cells and batteries go in non-metallic inner packagings that separate them from conductive materials, then into Packing Group II boxes, drums or jerricans. [49 CFR 173.185(b)(3)(i)-(ii)] ### Shipping wet (flooded) batteries under 49 CFR 173.159 Wet batteries (UN2794 acid, UN2795 alkali) follow 49 CFR 173.159: protect terminals, prevent short circuits and heat, then use a listed specification packaging, a permitted non-specification box, or a secured pallet. By highway or rail, paragraph (e) excepts them from most other rules when no other hazardous materials share the vehicle. - Wet batteries may not be packed with other materials except as the section allows, and must be packaged to prevent a dangerous evolution of heat, short circuits and damage to terminals. [49 CFR 173.159(a)] - If the outer packaging is not impact resistant it cannot be the only protection for terminals; batteries must be cushioned so terminal caps do not loosen. [49 CFR 173.159(a)(3)] - Batteries secured to skids or pallets are authorized by rail, highway or vessel; stack height no more than 1.5 times pallet width; terminals must not carry superimposed weight. [49 CFR 173.159(d)(1)] - One to three batteries of up to 11.3 kg (25 lb) each may go in strong outer boxes up to 34 kg (75 lb) gross. [49 CFR 173.159(d)(3)] - Single batteries up to 34 kg (75 lb) may go in 5-sided slip covers or closed fiberboard boxes of at least 200 lb Mullen test strength. [49 CFR 173.159(d)(6)] - By highway or rail, wet batteries are not subject to other requirements if no other hazardous materials are in the vehicle, the batteries are braced against damage and short circuits, other cargo is secured against contact, and pallets are stacked so as not to damage each other. [49 CFR 173.159(e)(1)-(3)] - Except when consolidating batteries for recycling, the vehicle may not carry material shipped by anyone other than the battery shipper. [49 CFR 173.159(e)(4)] - Incident reporting under 171.15 still applies. [49 CFR 173.159(e)(5)] - Damaged batteries that cannot retain fluid may go by highway or rail in non-bulk packaging after draining, in a leakproof intermediate package with absorbent, in salvage packaging, or in leakproof packaging when palletized. [49 CFR 173.159(k)(1)] - Damaged batteries shipped this way can still use the paragraph (e) exception. [49 CFR 173.159(k)(2)] ### Dry cell batteries and special provision 130 Alkaline, carbon-zinc and nickel-metal hydride batteries not covered by another HMT entry ship as "Batteries, dry, sealed, n.o.s." under special provision 130. They are free of most hazardous materials rules, but must be packed to prevent short circuits, heat and terminal damage. Used dry batteries rated up to 9 volts going by highway or rail for recycling are fully excepted. - Special provision 130 describes dry batteries as hermetically sealed, generally using metals other than lead and/or carbon as electrodes; batteries covered by another HMT entry follow that entry. [49 CFR 172.102 130] - "Batteries, dry, sealed, n.o.s." appears in the HMT with special provision 130 and no hazard class. [49 CFR 172.101] - Batteries must be prepared to prevent a dangerous evolution of heat and short circuits: enclosed non-conductive inner packagings, separation from other batteries and metal, or non-conductive caps or tape on exposed terminals. [49 CFR 172.102 130(b)(1)-(2)] - Terminals must be protected from damage; packing must stop shifting that could loosen caps or reorient terminals. [49 CFR 172.102 130(b)(3)] - Fires, violent rupture, explosion or dangerous heat caused by a dry battery require a written incident report in all modes; by air, a telephone report as well. [49 CFR 172.102 130(a)] - For batteries over 9 volts carried by air, devices must be protected against unintentional activation and packages or air waybills must show "not restricted". [49 CFR 172.102 130(c)] - Used or spent dry batteries with a marked rating up to 9 volts, combined in one package and moved by highway or rail for recycling, reconditioning or disposal, are not subject to special provision 130 or any other requirement of the HMR. [49 CFR 172.102 130(d)] - Batteries of other chemistries that have their own HMT entry (for example lithium) and dry batteries rated above 9 volts may not be mixed into that package. [49 CFR 172.102 130(d)] ### Medical device lithium batteries on passenger aircraft Under 49 CFR 173.185(g), up to two replacement lithium cells or batteries used for a medical device may travel as cargo on a passenger aircraft, beyond the normal Hazardous Materials Table limits, when the Associate Administrator approves it and the destination lacks daily cargo-aircraft service for medically necessary care. - Section 173.185 defines a medical device as an instrument, apparatus, implant or similar item, with its parts and accessories, intended for diagnosis, cure, mitigation, treatment or prevention of disease in a person. [49 CFR 173.185 introductory text] - Up to two replacement lithium cells or batteries specifically used for a medical device may be transported as cargo on a passenger aircraft regardless of the column 9A limits. [49 CFR 173.185(g)] - Approval by the Associate Administrator is required. [49 CFR 173.185(g)] - The destination must not be serviced daily by cargo aircraft, where a battery is required for medically necessary care. [49 CFR 173.185(g)(1)] - Lithium ion medical device batteries are excepted from the A100 state-of-charge limit if individually packed, in a rigid outer packaging and protected against short circuits. [49 CFR 173.185(g)(2)] ### IATA PI 965 (UN3480) IATA Packing Instruction 965 governs UN3480 lithium ion cells and batteries shipped by themselves by air. IATA's 2026 guidance lists Section IA (UN specification packaging, cargo aircraft 35 kg) and Section IB (cargo aircraft 10 kg); both are forbidden on passenger aircraft and limited to 30 percent state of charge. - Section IA: forbidden on passenger aircraft, 35 kg per package on cargo aircraft only, UN specification packaging. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Section IB: forbidden on passenger aircraft, 10 kg per package on cargo aircraft only; packaging must pass a 1.2 m drop test and 3 m stack test. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Lithium ion batteries packed by themselves must be shipped at no more than 30 percent state of charge; above that requires State of Origin and State of the Operator approval (special provision A331). [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - All PI 965 Section IA and IB packages must bear a Cargo Aircraft Only label. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - U.S. counterpart: 49 CFR lists UN3480 as forbidden on passenger aircraft and 35 kg on cargo aircraft. [49 CFR 172.101] ### IATA PI 966 (UN3481, packed with equipment) IATA Packing Instruction 966 covers UN3481 lithium ion batteries packed in the same box as the equipment they power. IATA's 2026 guidance lists Section I (5 kg passenger, 35 kg cargo, UN specification packaging) and Section II (5 kg on either). From 1 January 2026 these batteries ship at reduced state of charge. - Section I: 5 kg per package on passenger aircraft, 35 kg on cargo aircraft, UN specification packaging. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Section II: 5 kg per package on passenger and cargo aircraft. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - From 1 January 2026, Section I lithium ion cells and batteries packed with equipment must be offered at no more than 30 percent of rated capacity unless approved. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - IATA's guidance page notes a requirement introduced in January 2025 for non-UN specification packagings under PI 966 Section II. [Lithium batteries (DGR guidance page)] ### IATA PI 967 (UN3481, contained in equipment) IATA Packing Instruction 967 covers UN3481 lithium ion batteries installed in equipment such as laptops and power tools. IATA's 2026 guidance lists Section I at 5 kg per package on passenger aircraft and 35 kg on cargo aircraft, and Section II at 5 kg on either, with some exceptions to the battery mark. - Section I: 5 kg per package on passenger aircraft, 35 kg on cargo aircraft. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Section II: 5 kg per package on passenger and cargo aircraft, with exceptions to the battery mark. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Inactive data loggers and cargo tracking devices are offered under PI 967, 970 or 978. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - U.S. counterpart: 49 CFR 173.185(c)(4) limits small batteries contained in equipment by air to the number needed to power it plus two spare sets, and 5 kg net per package. [49 CFR 173.185(c)(4)(i)] ### IATA PI 968 (UN3090) IATA Packing Instruction 968 governs UN3090 lithium metal cells and batteries shipped by themselves. IATA's 2026 guidance lists Section IA (35 kg, UN specification packaging) and Section IB (2.5 kg, drop and stack tested); both are forbidden on passenger aircraft. - Section IA: forbidden on passenger aircraft, 35 kg per package on cargo aircraft, UN specification packaging. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Section IB: forbidden on passenger aircraft, 2.5 kg per package on cargo aircraft; 1.2 m drop and 3 m stack tested. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - PI 968 packages may not share an outer packaging or overpack with Class 1 (other than 1.4S), Division 2.1, Class 3, Division 4.1 or Division 5.1 goods. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - U.S. counterpart: 49 CFR 173.185(b)(7) imposes the same segregation for aircraft. [49 CFR 173.185(b)(7)] ### IATA PI 969 (UN3091, packed with equipment) IATA Packing Instruction 969 covers UN3091 lithium metal batteries packed with the equipment they power. IATA's 2026 guidance lists Section I at 5 kg per package on passenger aircraft and 35 kg on cargo aircraft with UN specification packaging, and Section II at 5 kg on either. - Section I: 5 kg passenger, 35 kg cargo, UN specification packaging. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Section II: 5 kg passenger and cargo. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - IATA's guidance page lists PI 969 Section II among the packing instructions that gained a non-UN-specification packaging requirement in January 2025. [Lithium batteries (DGR guidance page)] - U.S. counterpart: UN3091 "packed with equipment" carries special provisions 181, 360, 388, 422 and A54. [49 CFR 172.101] ### IATA PI 970 (UN3091, contained in equipment) IATA Packing Instruction 970 covers UN3091 lithium metal batteries installed in equipment, such as devices with primary lithium cells. IATA's 2026 guidance lists Section I at 5 kg passenger and 35 kg cargo, and Section II at 5 kg on either with exceptions to the battery mark. - Section I: 5 kg passenger, 35 kg cargo. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Section II: 5 kg passenger and cargo, with exceptions to the battery mark. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - Inactive data loggers and cargo tracking devices are offered under PI 967, 970 or 978. [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] - U.S. counterpart: special provision A101 caps lithium metal in equipment at 12 g per cell and 500 g per battery. [49 CFR 172.102 A101] ### Laptops, phones and tablets Laptop, phone and tablet batteries are lithium-ion. A business discarding them can manage them as universal waste. Shipped inside the device they are UN3481 "contained in equipment"; loose packs are UN3480. Most fall under the 100 Wh per battery limit for the 49 CFR 173.185(c) small-battery exception. - EPA states most lithium-ion batteries are likely D001 and D003 hazardous waste when discarded by businesses. [Lithium-Ion Battery Recycling (page updated September 18, 2026)] - A handler may remove batteries from consumer products and disassemble packs, as long as cell casings stay intact. [40 CFR 273.13(a)(2)] - Batteries discarded by households are excluded from federal hazardous waste rules. [40 CFR 261.4(b)(1)] - Batteries inside the device ship as UN3481 "contained in equipment"; 5 kg per package is allowed on passenger aircraft. [49 CFR 172.101] - The small-battery exception in 173.185(c) is limited to 20 Wh per cell and 100 Wh per battery for lithium ion. [49 CFR 173.185(c)(1)(i)] - Devices going to recycling by motor vehicle may use the 173.185(d) exception. [49 CFR 173.185(d)] - Several state stewardship laws cover only batteries that are easily removable; Washington, for example, excludes batteries not easily removable from a product. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.010] - Maine adds batteries embedded in products from January 1, 2030. [38 M.R.S. § 1617 Battery stewardship program (PL 2025, c. 608)] ### E-bikes and e-scooters A complete e-bike or e-scooter ships as UN3171 "Battery-powered vehicle"; a loose battery pack ships as UN3480. Packs are often several hundred watt-hours, above the 100 Wh small-battery limit, so full Class 9 rules apply. Damaged packs may go only by highway, rail or vessel under 49 CFR 173.185(f). - Special provision 134 lists bicycles with an electric motor, scooters and self-balancing vehicles as vehicles under UN3171. [49 CFR 172.102 134] - Special provision 360 says a vehicle powered only by lithium batteries is described as UN3171. [49 CFR 172.102 360] - Lithium ion batteries above 100 Wh do not qualify for the 173.185(c) small-battery exception. [49 CFR 173.185(c)(1)(i)] - Damaged or defective packs that could overheat, catch fire or short may move only by highway, rail or vessel. [49 CFR 173.185(f)] - Washington brings medium-format batteries (more than 11 lb or 300 Wh, up to 25 lb and 2,000 Wh) under its program, with retail and disposal rules from July 1, 2029. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.010, .030, .140] - Vermont plans must provide special collection for damaged lithium batteries and lithium-ion batteries over 300 Wh. [10 V.S.A. chapter 168, § 7584] ### Power tool batteries Cordless tool packs are usually lithium-ion; older ones are nickel-cadmium or nickel-metal hydride. Ni-Cd packs are Battery Act "regulated batteries" with mandatory recycling labels. All three can be managed as universal waste by businesses. Loose lithium-ion packs ship as UN3480; tools with packs attached ship as UN3481. - Ni-Cd batteries must carry "Ni-Cd" and "BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY." [Mercury-Containing and Rechargeable Battery Management Act, §14322(b)(2)(A)] - Lithium-ion packs must show their watt-hour rating on the case (since May 10, 2024). [49 CFR 173.185(a)(5)] - Minnesota has banned rechargeable batteries, including tool packs, from mixed municipal solid waste since 1991. [Minn. Stat. § 115A.9157 Rechargeable batteries and products, subd. 2] - New York bans knowingly disposing of rechargeable batteries as solid waste. [N.Y. Environmental Conservation Law § 27-1805 Rechargeable battery disposal ban] - A business that sorts packs by chemistry before shipping may do so under the universal waste rule. [40 CFR 273.13(a)(2)] ### Electric vehicle battery packs A complete electric vehicle ships as UN3171. A removed EV pack ships as UN3480, and packs over 12 kg can use the large-battery packaging in 49 CFR 173.185(b)(5). Most state battery stewardship laws stop at 25 pounds or 2,000 Wh, so EV packs are generally outside them. - Batteries with a gross mass of 12 kg or more and a strong, impact-resistant outer casing may be packed in strong outer packagings, protective enclosures or on pallets. [49 CFR 173.185(b)(5)] - Special provision 134 lists electrically powered cars as vehicles under UN3171. [49 CFR 172.102 134] - Packs going to recycling by motor vehicle may use the 173.185(d) exception. [49 CFR 173.185(d)] - Washington's medium-format category stops at 25 lb and 2,000 Wh; the department must study large-format batteries separately. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.010, .150] - California's act excludes rechargeable batteries over 5 kg or 300 Wh and motor-vehicle batteries. [Battery Stewardship (Responsible Battery Recycling Act)] ### Energy storage systems Battery energy storage installed in a shipping container that powers equipment outside the container ships as UN3536 under special provision 389. Individual lithium modules ship as UN3480 with the large-battery packaging option. Retired storage batteries that are hazardous waste may be managed under the universal waste rule. - Special provision 389 requires batteries secured to the container's interior, protection against overcharge and over-discharge, and placards on two opposing sides. [49 CFR 172.102 389] - UN3536 is forbidden on passenger and cargo aircraft in the HMT. [49 CFR 172.101] - Modules of 12 kg or more with impact-resistant casings may ship on pallets or in protective enclosures. [49 CFR 173.185(b)(5)] - Lithium-ion batteries are likely ignitable and reactive hazardous waste when discarded, according to EPA. [Lithium-Ion Battery Recycling (page updated September 18, 2026)] - Spent lead-acid storage batteries can be managed under the lead-acid reclamation rule. [40 CFR 266.80(a)] ### Medical device batteries Several state battery stewardship laws exclude batteries in medical devices that are not sold to consumers for personal use. For shipping, 49 CFR 173.185(g) allows up to two replacement lithium batteries for a medical device as cargo on a passenger aircraft, with Associate Administrator approval, where cargo aircraft do not fly daily. - Washington excludes batteries in medical devices not designed and marketed principally to consumers. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.010] - Vermont's primary battery definition excludes batteries in medical devices not sold at retail for personal use. [10 V.S.A. chapter 168, § 7581] - California's act excludes medical-device batteries. [Battery Stewardship (Responsible Battery Recycling Act)] - Up to two replacement lithium batteries for a medical device may travel as cargo on passenger aircraft with approval. [49 CFR 173.185(g)] - Lithium ion medical device batteries packed this way are excepted from the 30 percent state-of-charge limit. [49 CFR 173.185(g)(2)] ### Ship used lithium batteries to a recycler by ground Used lithium batteries going to recycling by motor vehicle can use 49 CFR 173.185(d): pack them in a strong outer packaging that meets the general packaging rules, and they skip the UN 38.3 test records and UN specification packaging. If they also meet the small-battery size and marking conditions, most hazard communication rules drop away too. - Confirm the shipment goes by motor vehicle to a recycler, a permitted storage facility or a disposal site; the exception does not cover air. [49 CFR 173.185(d)] - Pull out any damaged, defective or recalled batteries; they must be packed separately under 173.185(f). [49 CFR 173.185(f)] - Protect each battery against short circuits, for example by covering terminals or using separate inner packagings. [49 CFR 173.185(a)(4)(ii)] - Pack in a strong outer packaging that meets the general requirements of 49 CFR part 173 subpart B. [49 CFR 173.185(d)(1)] - If every battery is within 20 Wh per cell and 100 Wh per battery (lithium ion) or 1 g and 2 g lithium (lithium metal), apply the lithium battery mark and the (c) packaging conditions to be excepted from part 172 subparts C–H. [49 CFR 173.185(d)(2); 49 CFR 173.185(c)(1)-(3)] - Otherwise, prepare shipping papers, marks and Class 9 labels for UN3480, UN3481, UN3090 or UN3091 as usual. [49 CFR 172.101] - If the batteries are universal waste, send them only to another universal waste handler or a destination facility, and confirm the receiver will accept them. [40 CFR 273.18(a), (d)] - The UN 38.3 testing and record-keeping requirements of 173.185(a). [49 CFR 173.185(d)(1)] - The UN performance packaging requirements in (b)(3)(ii), (b)(3)(iii) and (b)(6). [49 CFR 173.185(d)(1)] ### Pack a damaged, defective or recalled lithium battery A lithium battery that is damaged, or identified by its maker as defective for safety reasons, and could overheat, catch fire or short circuit may travel only by highway, rail or vessel. 49 CFR 173.185(f) requires an individual non-metallic inner packaging, non-combustible absorbent cushioning, a Packing Group I outer packaging and a 12 mm "Damaged/defective" mark. - Do not offer it for air transport; damaged, defective or recalled batteries may go by highway, rail or vessel only. [49 CFR 173.185(f)] - Place each cell or battery in its own non-metallic inner packaging that completely encloses it. [49 CFR 173.185(f)(1)] - Surround the inner packaging with cushioning that is non-combustible, electrically non-conductive and absorbent. [49 CFR 173.185(f)(2)] - Put each inner packaging in a Packing Group I metal, wooden or solid plastic box, or metal, plywood or plastic drum; a single large battery may use a rigid large packaging. [49 CFR 173.185(f)(3)] - Mark the outer package "Damaged/defective lithium ion battery" or "Damaged/defective lithium metal battery" in characters at least 12 mm high. [49 CFR 173.185(f)(4)] - If the battery leaked or broke while in storage, contain the release immediately and decide whether the residue is hazardous waste. [40 CFR 273.17] - Batteries damaged or identified by the manufacturer as defective for safety reasons, with the potential for dangerous heat, fire or short circuit, including those returned to the manufacturer for safety reasons. [49 CFR 173.185(f)] ### Protect battery terminals before shipping or storing Every U.S. battery shipping rule requires protection against short circuits. For dry batteries, special provision 130 accepts non-conductive caps or tape over exposed terminals, separate non-conductive inner packagings, or separation from other batteries and metal. Lithium batteries must have a means of preventing external short circuits; wet batteries must have protected terminals. - Cover exposed terminals with non-conductive caps, tape or similar, or put each battery in its own non-conductive inner packaging. [49 CFR 172.102 130(b)(1)-(2)] - Keep batteries from touching each other, metal objects and other conductive material. [49 CFR 172.102 130(b)(2)] - Pack so batteries cannot shift and loosen caps or reorient terminals. [49 CFR 172.102 130(b)(3)] - For lithium batteries, also confirm each has a means of preventing external short circuits. [49 CFR 173.185(a)(4)(ii)] - For wet batteries, prevent damage to terminals and cushion them so terminal caps do not loosen. [49 CFR 173.159(a)] - Used dry batteries up to 9 volts consolidated for recycling by highway or rail are excepted from the HMR, but lithium and higher-voltage batteries may not be mixed in. [49 CFR 172.102 130(d)] ### Sort and segregate waste batteries The universal waste rule lets handlers sort batteries by type, mix types in one container, and take packs apart, as long as cell casings stay intact. Transport rules then push you to separate them: lithium batteries need their own UN entries and may not ride in the used dry-battery exception, and damaged lithium batteries need separate packaging. - Keep every cell casing intact and closed while sorting. [40 CFR 273.13(a)(2)] - Separate leaking or damaged batteries into closed, compatible containers. [40 CFR 273.13(a)(1)] - Separate lithium batteries from alkaline and other dry batteries if you plan to use the used dry-battery exception. [49 CFR 172.102 130(d)] - Separate damaged, defective or recalled lithium batteries for 173.185(f) packaging. [49 CFR 173.185(f)] - Separate spent lead-acid batteries if you will manage them under the lead-acid reclamation rule. [40 CFR 266.80(a)] - Label each container with an allowed universal waste phrase. [40 CFR 273.14(a)] - Sorting by type, mixing types in one container, discharging, regenerating, disassembling packs, removing batteries from products and removing electrolyte. [40 CFR 273.13(a)(2)] ### Label a battery collection container Mark each universal waste battery, or the container holding it, with "Universal Waste—Battery(ies)", "Waste Battery(ies)" or "Used Battery(ies)" (40 CFR 273.14(a)). Separately, show how long the batteries have been accumulating, for example by dating the container. When the container ships, DOT marks and labels apply on top. - Write one permitted phrase on the container: "Universal Waste—Battery(ies)", "Waste Battery(ies)" or "Used Battery(ies)". [40 CFR 273.14(a)] - Mark the earliest date any battery in it became a waste or was received, or use another method in 273.15(c). [40 CFR 273.15(c)(1)] - Keep the container closed and structurally sound if it holds leaking or damaged batteries. [40 CFR 273.13(a)(1)] - Before shipping, add DOT package marks and labels if the batteries are hazardous materials; do not use "hazardous waste" or add "waste" to the shipping name. [40 CFR 273.52(b); 40 CFR 273.18(c)] ### Store and date waste batteries A universal waste handler may keep batteries for up to one year from when they became waste or arrived (40 CFR 273.15). You must be able to show how long they have been there, by dating containers, individual batteries, an inventory or a designated area. At 5,000 kg of universal waste on site you become a large quantity handler. - Start the clock on the date a battery becomes a waste, or the date you receive it from another handler. [40 CFR 273.15(a)] - Pick a dating method: date each container, date each battery, keep an inventory, or use a designated area with the earliest date posted. [40 CFR 273.15(c)(1)-(5)] - Ship within one year, unless you can prove you are holding them only to gather enough for proper recovery. [40 CFR 273.15(a)-(b)] - Track your total universal waste on site; at 5,000 kg you must notify EPA and get an ID number before reaching the limit. [40 CFR 273.9; 40 CFR 273.32(a)] ### Keep battery shipment records Small quantity handlers of universal waste do not have to keep shipment records. Large quantity handlers must record every shipment in and out, with the other party's name and address, the quantity of each type and the date, and keep it at least three years (40 CFR 273.39). A bill of lading or invoice can serve. - Work out whether you are a small or large quantity handler (5,000 kg on site at any time). [40 CFR 273.9] - For each shipment received, record the sender's name and address, the quantity of each universal waste type and the date received. [40 CFR 273.39(a)] - For each shipment sent, record the receiver's name and address, the quantity of each type and the date it left. [40 CFR 273.39(b)] - Use any shipping document that has this information: a log, invoice, manifest or bill of lading. [40 CFR 273.39(a)] - Keep each record for at least three years. [40 CFR 273.39(c)] ### Choose where your waste batteries go Under 40 CFR 273.18, a handler may send universal waste batteries only to another universal waste handler, a destination facility, or a foreign destination under the export rules. You must make sure the receiver agrees to take the shipment before it leaves, and take back any load the receiver rejects or agree on another destination facility. - Confirm the receiver is a universal waste handler or a destination facility (one that treats, disposes of or recycles the waste). [40 CFR 273.18(a); 40 CFR 273.9] - Get the receiver's agreement to accept the shipment before sending it. [40 CFR 273.18(d)] - For exports, follow part 262 subpart H. [40 CFR 273.20] - If the receiver rejects the load, take it back or agree with the receiver on a destination facility. [40 CFR 273.18(e)] - In stewardship states, check whether the program collects your batteries free; Illinois programs must accept covered batteries from businesses. [415 ILCS 205/40 Collection and management requirements, (a)] ## Glossary - **Battery (universal waste)**: Under Part 273, a battery is a device of one or more electrically connected electrochemical cells designed to receive, store and deliver electric energy, including an intact battery with its electrolyte removed. [40 CFR 273.9] - **Universal waste**: Universal waste is a set of hazardous wastes, batteries among them, along with pesticides, mercury-containing equipment, lamps and aerosol cans, that may be managed under the streamlined rules of 40 CFR Part 273. [40 CFR 273.9] - **Universal waste handler**: A handler is a generator of universal waste, or a facility that receives universal waste from other handlers, accumulates it and sends it on. [40 CFR 273.9] - **Small quantity handler of universal waste (SQHUW)**: A handler that never accumulates 5,000 kg or more of universal waste, all types combined, at any time. [40 CFR 273.9] - **Large quantity handler of universal waste (LQHUW)**: A handler that accumulates 5,000 kg or more of universal waste, all types combined, at any time; the status lasts through the end of that calendar year. [40 CFR 273.9] - **Destination facility**: A facility that treats, disposes of or recycles a category of universal waste; a facility that only accumulates it is not one. [40 CFR 273.9] - **Universal waste transfer facility**: A transportation-related facility, such as a loading dock or parking area, where universal waste shipments are held in the normal course of transport for ten days or less. [40 CFR 273.9] - **Universal waste transporter**: A person transporting universal waste off-site by air, rail, highway or water. [40 CFR 273.9] - **Accumulation start date**: The date a universal waste becomes a waste or is received from another handler, which starts the one-year accumulation limit. [40 CFR 273.15(a)] - **EPA identification number**: The number EPA assigns to each generator, transporter and treatment, storage or disposal facility. [40 CFR 260.10] - **Very small quantity generator (VSQG)**: A generator of no more than 100 kg of non-acute hazardous waste (and no more than 1 kg of acute hazardous waste) in a calendar month. [40 CFR 260.10] - **Small quantity generator (SQG)**: A generator of more than 100 kg but less than 1,000 kg of non-acute hazardous waste in a calendar month. [40 CFR 260.10] - **Large quantity generator (LQG)**: A generator of 1,000 kg or more of non-acute hazardous waste, or more than 1 kg of acute hazardous waste, in a calendar month. [40 CFR 260.10] - **Household waste exclusion**: Household waste, from single and multiple residences, hotels, motels, campgrounds and similar places, is not hazardous waste under federal rules. [40 CFR 261.4(b)(1)] - **D001 (ignitability)**: A solid waste that exhibits the characteristic of ignitability carries EPA Hazardous Waste Number D001. [40 CFR 261.21(b)] - **Hazardous material (DOT)**: A substance or material DOT has determined can pose an unreasonable risk to health, safety and property in transport, and designated as hazardous. [49 CFR 171.8] - **Hazmat employee**: A person employed by a hazmat employer (or self-employed) who, in the course of the job, directly affects hazardous materials transportation safety. [49 CFR 171.8] - **Proper shipping name**: The name of a hazardous material shown in Roman print in the Hazardous Materials Table. [49 CFR 171.8] - **Shipping paper**: A shipping order, bill of lading, manifest or similar document prepared under 49 CFR part 172 subpart C. [49 CFR 171.8] - **Packing group**: A grouping of hazardous materials by degree of danger: Packing Group I great, II medium, III minor. [49 CFR 171.8] - **Short circuit**: A direct connection between a battery's positive and negative terminals that gives an abnormally low resistance path for current. [49 CFR 171.8] - **Watt-hour rating**: A lithium-ion cell or battery's energy, found by multiplying its rated capacity in ampere-hours by its nominal voltage. [49 CFR 171.8] - **Lithium-ion battery (DOT definition)**: A rechargeable cell or battery whose electrodes are both lithium compounds with no metallic lithium in either; lithium-ion polymer batteries are included. [49 CFR 171.8] - **Lithium metal battery (DOT definition)**: A cell or battery that uses lithium metal or lithium alloy as the anode; its lithium content is measured undischarged and summed across cells. [49 CFR 171.8] - **Cargo aircraft only**: An aircraft used to carry cargo and not engaged in carrying passengers. [49 CFR 171.8] - **Passenger-carrying aircraft**: An aircraft carrying anyone other than a crewmember, company employee, authorized U.S. representative or person accompanying the shipment. [49 CFR 171.8] - **Regulated battery (Battery Act)**: A rechargeable battery that contains a cadmium or lead electrode, or another chemistry EPA designates. [Mercury-Containing and Rechargeable Battery Management Act, §14302(7)] - **Battery stewardship organization**: A nonprofit that producers join and fund to run a state-approved battery collection and recycling plan. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.020; 415 ILCS 205/15 Requirement that producers implement a stewardship plan] - **Covered battery**: The batteries a state stewardship law applies to; typically portable batteries (rechargeables to 11 lb and 300 Wh, primaries to 4.4 lb) and later medium-format batteries. [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.010] ## Comparisons ### UN3480 vs UN3481: which lithium-ion entry applies? Use UN3480 when lithium-ion batteries travel by themselves and UN3481 when they are inside the equipment they power or in the same package with it. The biggest practical difference is air: UN3480 is forbidden on passenger aircraft, while UN3481 is allowed up to 5 kg per package. - What it covers: UN3480 = Lithium ion batteries shipped alone; UN3481 = Contained in equipment, or packed with equipment [49 CFR 172.101] - Passenger aircraft: UN3480 = Forbidden; UN3481 = 5 kg per package [49 CFR 172.101] - Cargo aircraft: UN3480 = 35 kg per package; UN3481 = 35 kg per package [49 CFR 172.101] - Special provisions: UN3480 = 388, 422, A54, A100; UN3481 = 181, 360, 388, 422, A54 [49 CFR 172.101] - 30% state of charge (A100): UN3480 = Applies; UN3481 = Not listed [49 CFR 172.102 A100; 49 CFR 172.101] - IATA packing instruction: UN3480 = PI 965; UN3481 = PI 966 (packed with), PI 967 (contained in) [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] ### UN3090 vs UN3091: lithium metal batteries alone or with equipment UN3090 covers lithium metal cells and batteries shipped by themselves and is forbidden on passenger aircraft. UN3091 covers lithium metal batteries contained in or packed with equipment and allows 5 kg per package on passenger aircraft; the "contained in" row also caps lithium at 12 g per cell and 500 g per battery. - What it covers: UN3090 = Lithium metal batteries shipped alone; UN3091 = Contained in, or packed with, equipment [49 CFR 172.101] - Passenger aircraft: UN3090 = Forbidden; UN3091 = 5 kg per package [49 CFR 172.101] - Cargo aircraft: UN3090 = 35 kg per package; UN3091 = 35 kg per package [49 CFR 172.101] - Special provisions: UN3090 = 388, 422, A54; UN3091 = 181, 360, 388, 422, A54 (+A101 contained in) [49 CFR 172.101] - IATA packing instruction: UN3090 = PI 968; UN3091 = PI 969 (packed with), PI 970 (contained in) [IATA Guidance Document for Lithium Batteries and Sodium Ion Batteries (dated 01/01/2026)] ### Universal waste vs hazardous waste rules for batteries Batteries that are hazardous waste can be managed under the full RCRA generator rules or the simpler universal waste rule in 40 CFR Part 273. Under Part 273 there is no hazardous waste manifest, storage is allowed for a year, and the batteries do not count toward monthly generator thresholds. - Manifest: Universal waste (Part 273) = Not required; Full hazardous waste rules = Required for off-site shipments [40 CFR 273.52(a)] - Counts toward generator category: Universal waste (Part 273) = No; Full hazardous waste rules = Yes [40 CFR 261.9] - Size test: Universal waste (Part 273) = 5,000 kg on site at any time; Full hazardous waste rules = Monthly generation (100 kg / 1,000 kg) [40 CFR 273.9; 40 CFR 260.10] - Storage time: Universal waste (Part 273) = One year; Full hazardous waste rules = Depends on generator category [40 CFR 273.15] - Container label: Universal waste (Part 273) = "Universal Waste—Battery(ies)" or two alternatives; Full hazardous waste rules = Hazardous waste labeling [40 CFR 273.14(a)] - DOT shipping name: Universal waste (Part 273) = May not add "waste"; Full hazardous waste rules = Hazardous waste descriptions apply [40 CFR 273.52(b)] ### Small vs large quantity handler of universal waste: what changes at 5,000 kg A universal waste handler becomes a large quantity handler at 5,000 kg of universal waste on site at any time, all types combined. The large handler must notify EPA and get an ID number first, keep three-year shipment records and train employees more thoroughly. Labeling and the one-year limit are the same. - Threshold: Small quantity handler = Under 5,000 kg at all times; Large quantity handler = 5,000 kg or more at any time [40 CFR 273.9] - EPA notification and ID: Small quantity handler = Not required; Large quantity handler = Required before reaching 5,000 kg [40 CFR 273.12; 40 CFR 273.32] - Shipment records: Small quantity handler = Not required; Large quantity handler = Each shipment in and out, kept 3 years [40 CFR 273.19; 40 CFR 273.39] - Training: Small quantity handler = Inform employees; Large quantity handler = Ensure employees are thoroughly familiar [40 CFR 273.16; 40 CFR 273.36] - Labeling: Small quantity handler = Same three phrases; Large quantity handler = Same three phrases [40 CFR 273.14; 40 CFR 273.34] - Accumulation limit: Small quantity handler = One year; Large quantity handler = One year [40 CFR 273.15; 40 CFR 273.35] ### Portable vs medium-format batteries under state stewardship laws Washington and Illinois split covered batteries into portable (rechargeable up to 11 lb and 300 Wh; primary up to 4.4 lb) and medium format (above those limits, up to 25 lb, and for rechargeables 2,000 Wh). In Washington, retail and disposal rules reach medium-format batteries two years after portable ones. - Rechargeable: Portable = Up to 11 lb and 300 Wh; Medium format = Over 11 lb or 300 Wh, up to 25 lb and 2,000 Wh [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.010] - Primary: Portable = Up to 4.4 lb; Medium format = Over 4.4 lb, up to 25 lb [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.010] - Washington retail restriction: Portable = July 1, 2027; Medium format = July 1, 2029 [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.030(1)] - Washington disposal rules: Portable = July 1, 2027; Medium format = July 1, 2029 [RCW 70A.555 Batteries — Environmental stewardship, 70A.555.140] ### Wet vs non-spillable lead-acid batteries for shipping Flooded lead-acid batteries ship as UN2794 under 49 CFR 173.159, with a highway and rail exception in paragraph (e). Non-spillable batteries ship as UN2800 and, if they meet 173.159a, are excepted from the 173.159 packaging rules when packed securely and marked "NON-SPILLABLE" or "NON-SPILLABLE BATTERY". - UN number: Wet (spillable) = UN2794; Non-spillable = UN2800 [49 CFR 172.101] - Hazard class: Wet (spillable) = 8; Non-spillable = 8 [49 CFR 172.101] - Packaging section: Wet (spillable) = 173.159; Non-spillable = 173.159 and 173.159a [49 CFR 173.159; 49 CFR 173.159a] - Key exception: Wet (spillable) = Highway/rail, 173.159(e); Non-spillable = Packaging exception, 173.159a(c) [49 CFR 173.159(e); 49 CFR 173.159a(c)] - Required marking under the exception: Wet (spillable) = None specific; Non-spillable = "NON-SPILLABLE" or "NON-SPILLABLE BATTERY" [49 CFR 173.159a(c)(2)]